# 2017 fusion se troubleshoot help

**URL:** <https://community.cyanlabs.net/t/2017-fusion-se-troubleshoot-help/28526>\
**Category:** Discussion\
**Tags:** FCIM\
**Created:** [2 November 2026 21:29 UTC](https://community.cyanlabs.net/t/2017-fusion-se-troubleshoot-help/28526 "2026-11-02T21:29:21Z")\
**Posts on this page:** 4\
**Page:** 2

<div class="post-metadata">

**Author:** ![bill32399](https://community.cyanlabs.net/user_avatar/community.cyanlabs.net/bill32399/32/2724_2.png) [@bill32399](https://community.cyanlabs.net/u/bill32399)\
**Post date:** [4 November 2026 01:52 UTC](https://community.cyanlabs.net/t/2017-fusion-se-troubleshoot-help/28526/22 "2026-11-04T01:52:40Z")

</div>

> [@7717Fuse](#):
>
> they cut the wires about 1” from the connector.

Easy, Just de-pin it and solder it. Than reinsert and your golden.

---

<div class="post-metadata">

**Author:** ![7717Fuse](https://community.cyanlabs.net/user_avatar/community.cyanlabs.net/7717fuse/32/21204_2.png) [@7717Fuse](https://community.cyanlabs.net/u/7717Fuse)\
**Post date:** [4 November 2026 02:22 UTC](https://community.cyanlabs.net/t/2017-fusion-se-troubleshoot-help/28526/23 "2026-11-04T02:22:36Z")

</div>

That’s an idea, I’m just not sure if the connector is serviceable. The wires come out at a 90 deg angle and I can’t tell if the connector comes apart

---

<div class="post-metadata">

**Author:** ![warlock12118](https://community.cyanlabs.net/letter_avatar_proxy/v4/letter/w/e95f7d/32.png) [@warlock12118](https://community.cyanlabs.net/u/warlock12118)\
**Post date:** [4 November 2026 02:58 UTC](https://community.cyanlabs.net/t/2017-fusion-se-troubleshoot-help/28526/24 "2026-11-04T02:58:36Z")

</div>

It comes apart, the 90° shell comes off, pull the face clip, pins come out the face not the back.

---

<div class="post-metadata">

**Author:** ![bill32399](https://community.cyanlabs.net/user_avatar/community.cyanlabs.net/bill32399/32/2724_2.png) [@bill32399](https://community.cyanlabs.net/u/bill32399)\
**Post date:** [4 November 2026 04:54 UTC](https://community.cyanlabs.net/t/2017-fusion-se-troubleshoot-help/28526/25 "2026-11-04T04:54:24Z")

</div>

You probally have more wire than you relize once you take the 90deg shell off.

[Previous page](https://community.cyanlabs.net/t/2017-fusion-se-troubleshoot-help/28526.md?page=1)