@F150Chief Thanks for checking for me. I had a bricked EU 64Gb late 2017 J type APIM to investigate and following your notes HB5T-14G375-HA looked like the VBF file I needed.
Last night I was able to get the APIM to show the splash screen using the configuration below but then it got itself stuck in a loop where the splash screen would show then screen showed show vertical white lines and then would restart.
This suggested corrupted software rather than firmware. Blowing in the latest software with Syn3 Updater got the APIM fully recovered. Something I don’t understand is why the HB5T-14G375-FA calibration file works with the 64Gb EU APIM?
Reviewing @bakedpatato’s module list over in the H TCU thread, apparently ours match on both the Part # and calibration level, but the strategy level is newer on the 2016 above the latest that I had previously.
My 2013 C-Max:
ACM - Audio Control Module
Part number: CM5T-19C107-FY
Calibration level: CM5T-19C107-FY
Strategy : CM5T-14D099-FK
Calibration: CM5T-14D100-FY
2016 C-Max:
ACM - Audio Control Module
Part number: CM5T-19C107-FY
Calibration level: CM5T-19C107-FY
Strategy : FM5T-14D099-MJ
Calibration: CM5T-14D100-FY
I want to give this one a go on the long shot it MAY help. Not getting my hopes up too far though.
Thank you for this. Very much appreciated as always!
And that fixed it! The original documented issue with the HD Radio lock/No audio is still fixed and the audio levels are back to normal with the HD signal perfectly in check with analog FM and other audio sources. I’m happy with it now. Another shoutout to @bakedpatato for sharing their module list that gave me that little breadcrumb to chase down.
Hey. Can I get vb files for my KJ5T-14G370-RGB APIM/SYNC 3.4/EU please?
Is there any VB files needed to update USB calibration on APIM?
UPD:
Secondary Boot Loader: GB5T-14G376-AA - Found in this thread
Strategy (F188): 1U5T-14G374-EE (6/11/2019) - this is basically the only file I’m missing
Calibration (F124) : 1U5T-14G375-HA (NAV) - Found in other thread
ECU Configuration/Sound Profiles (F10A): GB5T-14G379-AA Found in other thread
ECU Configuration/Illumination Strategy (F16B): 5U5T-14G379- BA (6/11/2019) Found in other thread
The part number would be LX7T-14G229-DX TCU it’s the strategy file / configuration file there maybe one that has superceded the AB file but I can’t find either!