Is it possible to upgrade to 3.4?

[frantiseklorenc]

I bought an older car (manufactured 6.2018) and would like to update SYNC3.
SYNC3 is version 3.0.20204.
I made an interrogator log and here is the result:

VIN: ****
Version JR3T-14G381-AX
APIM Model: JR3T-14G371-FFB
APIM Type: Navigation 
APIM Size: 64GB 
APIM Free Space: 14G 
04.06.2023 6:57:20 +00:00

Partition Type = Free / Total
/fs/usb0/ = 3.8G / 3.8G
/fs/tmpfs/ = 126M / 128M
/fs/sd/MAP/ = 6.2M / 1.1G
/fs/sd/MAP/ = 28M / 19G
/fs/Nuance/ = 48M / 18G
/fs/Nuance/ = 7.6M / 1.9G
/fs/rwdata/ = 713M / 1024M
/fs/mp/ = 40M / 1024M
/fs/images/ = 14G / 55G

Installed Packages
JR3T-14G421-BH
JR3T-14G424-BH
JR3T-14G422-BG
JR3T-14G391-AE




APIM AsBuilt
DE00: 8A6A059A10026E4006C2
DE01: 474D0106C00B488000801000
DE02: 0203000000
DE03: 01001D00240107
DE04: 1AC21AA42BD0
DE05: 80
DE06: 07003300000000171C000056566E006A

Will it be possible to update to 3.4 using reformat? Or am I out of luck and have My20?

Thank you very much for the answer.

[bill32399]

If it was made in 2018 than you should be fine unless the APIM was replaced.

[SaNdMaN]

Hello.

DO NOT REFORMAT THAT UNIT, IT’S MY20.

Didn’t Syn3Updater warn you about being MY20?
If the answer is no, can you please upload the xml file?.

Thanks.

[F150Chief]

@frantiseklorenc

JR3T-14G371-FFB

That is a Ford Service Replacement unit and is MY20+

Thank you @SaNdMaN