# MEM\_ERR03 after an interupdated MAP install

**URL:** <https://community.cyanlabs.net/t/mem-err03-after-an-interupdated-map-install/28219>\
**Category:** Ford Update Support\
**Tags:** oem, nav, eu, APIM, BCM, SYNC3, my20\
**Created:** [16 October 2026 16:33 UTC](https://community.cyanlabs.net/t/mem-err03-after-an-interupdated-map-install/28219 "2026-10-16T16:33:13Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![kugaaguk](https://community.cyanlabs.net/letter_avatar_proxy/v4/letter/k/ed8c4c/32.png) [@kugaaguk](https://community.cyanlabs.net/u/kugaaguk)\
**Post date:** [16 October 2026 16:33 UTC](https://community.cyanlabs.net/t/mem-err03-after-an-interupdated-map-install/28219/1 "2026-10-16T16:33:13Z")

</div>

I tried to update my maps from F13 to the updated F13 (2024) release.

I set off on a 1.5-hour journey this morning. Part 1 of the installation started normally, but then SYNC displayed the message asking me to perform a key cycle. I couldn’t stop immediately, so I continued driving while the system carried on updating.

When I reached my destination, I switched the car off, assuming this would count as the key cycle. I returned to the car about an hour later, and SYNC reported that Part 1 was complete and Part 2 would now begin.

However, Part 2 only runs for around 10 minutes before failing with:

`Installation Failed – Error code: MEM_ERR03`

**Troubleshooting so far:**

- Performed a master reset.

- Removed Gracenotes using Syn3 Updater (after generating the interrogator log below).

- Retried the official Ford USB update, but it failed with the same error.

VIN: WF0FXXWPM  
APIM Model: NU5T-14G371-GAF  
APIM Type: Navigation  
APIM Size: 64GB  
APIM Free Space: 9.0G  
Version 3.4.26057 (NU5T-14G381-AE)

16/10/2026 15:24:31 +00:00

Partition Type = Free / Total  
/fs/sd/MAP/ = 976K / 1.2G  
/fs/sd/MAP/ = 15M / 3.0G  
/fs/sd/MAP/ = 14M / 2.4G  
/fs/sd/MAP/ = 7.8M / 1.6G  
/fs/sd/MAP/ = 17M / 2.4G  
/fs/sd/MAP/ = 26M / 3.7G  
/fs/sd/MAP/ = 312K / 41M  
/fs/sd/MAP/ = 4.9M / 3.4G  
/fs/sd/MAP/ = 27M / 3.4G  
/fs/Nuance/ = 29M / 5.0G  
/fs/Nuance/ = 30M / 5.2G  
/fs/Nuance/ = 27M / 4.6G  
/fs/Nuance/ = 38M / 3.9G  
/fs/Nuance/ = 8.4M / 1.9G  
/fs/Nuance/grace = 21M / 1003M  
/fs/rwdata/ = 967M / 1.2G  
/fs/rwdata/quip/ = 35M / 35M  
/fs/rwdata/quip/ = 90M / 90M  
/fs/mp/ = 84M / 1.4G  
/fs/mp/resources = 332K / 72M  
/fs/images/ = 9.0G / 54G

Installed Packages  
1U5T-14G421-BAM  
1U5T-14G421-BBM  
1U5T-14G421-BCM  
1U5T-14G421-BDM  
1U5T-14G421-BEM  
1U5T-14G421-BFM  
1U5T-14G421-BGM  
1U5T-14G421-BHM  
1U5T-14G421-BJM  
1U5T-14G658-AH  
4U5T-14G422-BAM  
4U5T-14G422-BBM  
4U5T-14G422-BCM  
4U5T-14G422-BDM  
4U5T-14G423-AC  
5U5T-14G391-AT

1U5T-14G424-BP

APIM AsBuilt  
DE00: 8A6A01CA50023E040082  
DE01: 554B010EC2025C90ACB08E05  
DE02: 0007000000  
DE03: 00000680250102  
DE04: 18061810295F  
DE05: 20  
DE06: 17003300000000A17500005656790088

This isn’t causing any ongoing problems, as SYNC and navigation still work normally, but it’s frustrating that the installation won’t complete.

* * *

**SYNC Region:** EU

**Navigation Variant:** Nav

**Manufacturer Year:** MY20

**Install Type:** OEM

**Old SYNC Version:** 3.4.26057

**New SYNC Version:** 3.4.26057

**Do you have a error message, if so what is it?**  
MEM\_ERR03

**Update Method:** Official Ford

---

<div class="post-metadata">

**Author:** ![kugaaguk](https://community.cyanlabs.net/letter_avatar_proxy/v4/letter/k/ed8c4c/32.png) [@kugaaguk](https://community.cyanlabs.net/u/kugaaguk)\
**Post date:** [16 October 2026 16:59 UTC](https://community.cyanlabs.net/t/mem-err03-after-an-interupdated-map-install/28219/2 "2026-10-16T16:59:25Z")

</div>

I originally downloaded this map update in August, but today was my first journey long enough to let the installation run.

I’ve since checked Ford’s website, which now says both SYNC and maps are up to date. I also connected the car to Wi-Fi and checked for updates; SYNC reported that no updates were required - leaving me with no way to download a fresh ford file, or equally upload a log file if it did complete.

Could the Wi-Fi check have sent any status information back to Ford, making the website report the update as complete? Or does the website simply show that my existing SYNC and map versions are current?

---

<div class="post-metadata">

**Author:** ![system](https://community.cyanlabs.net/letter_avatar_proxy/v4/letter/s/bcef8e/32.png) [@system](https://community.cyanlabs.net/u/system)\
**Post date:** [15 November 2026 17:00 UTC](https://community.cyanlabs.net/t/mem-err03-after-an-interupdated-map-install/28219/3 "2026-11-15T17:00:12Z")

</div>

Closed on 15 November 2026 17:00 UTC

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.
