# Moving back to 3.3 from latest version **URL:** \ **Category:** SYNC 3 Support\ **Tags:** SYNC3, APIM\ **Created:** [7 May 2023 17:21 UTC](https://community.cyanlabs.net/t/moving-back-to-3-3-from-latest-version/9082 "2023-05-07T17:21:33Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![Stefmcd](https://community.cyanlabs.net/user_avatar/community.cyanlabs.net/stefmcd/32/14966_2.png) [@Stefmcd](https://community.cyanlabs.net/u/Stefmcd)\ **Post date:** [7 May 2023 17:21 UTC](https://community.cyanlabs.net/t/moving-back-to-3-3-from-latest-version/9082/1 "2023-05-07T17:21:33Z")
Hi. Can’t get used to the lack of a night dark option on the display. What’s the easiest way to revert back to the 3.3 version? I had a look at some threads and the downgrade document but I’m confused about whether it’s a fresh install of 3.3 or an actual downgrade option. I’m a 2018 focus who just went from 3.0 to the very latest package. Thanks in anticipation of any replies. 🙂 ---
**Author:** ![Stefmcd](https://community.cyanlabs.net/user_avatar/community.cyanlabs.net/stefmcd/32/14966_2.png) [@Stefmcd](https://community.cyanlabs.net/u/Stefmcd)\ **Post date:** [7 May 2023 17:24 UTC](https://community.cyanlabs.net/t/moving-back-to-3-3-from-latest-version/9082/2 "2023-05-07T17:24:05Z")
Ignore me, just found night mode! ---
**Author:** ![SaNdMaN](https://community.cyanlabs.net/user_avatar/community.cyanlabs.net/sandman/32/3220_2.png) [@SaNdMaN](https://community.cyanlabs.net/u/SaNdMaN)\ **Post date:** [7 May 2023 17:34 UTC](https://community.cyanlabs.net/t/moving-back-to-3-3-from-latest-version/9082/3 "2023-05-07T17:34:05Z")
> [@Stefmcd](#): > > I’m a 2018 focus who just went from 3.0 to the very latest package. Assuming you mean 3.4.22251, it’s recommended to avoid that build. There’s an ongoing issue with a partition getting full and reports state users were on that build when issue started. So if that’s the case, go to another build except that. ---
**Author:** ![wiz043](https://community.cyanlabs.net/user_avatar/community.cyanlabs.net/wiz043/32/14863_2.png) [@wiz043](https://community.cyanlabs.net/u/wiz043)\ **Post date:** [7 May 2023 22:24 UTC](https://community.cyanlabs.net/t/moving-back-to-3-3-from-latest-version/9082/4 "2023-05-07T22:24:05Z")
Hi…I just uploaded to that 22251 version, maps ANZ 2.21 recently and have had no issues so far except sometimes it doesn’t pick up saved USB music upon retart (no biggie). Is there some issue I should look out for and revert to a lower version, perhaps 21265 if needed. 2017 Ford Escape 2L. ---
**Author:** ![SaNdMaN](https://community.cyanlabs.net/user_avatar/community.cyanlabs.net/sandman/32/3220_2.png) [@SaNdMaN](https://community.cyanlabs.net/u/SaNdMaN)\ **Post date:** [7 May 2023 22:34 UTC](https://community.cyanlabs.net/t/moving-back-to-3-3-from-latest-version/9082/5 "2023-05-07T22:34:00Z")
This is not the place for this discussion. Review the following quote, if anything else is needed post in one of those threads which cover that issue (not the tutorial, of course). > [@Sync 3.4.22251 - Feedback & Issues](https://community.cyanlabs.net/t/sync-3-4-22251-feedback-issues/6515/1): > > # Community Spotted Issues > > ⚠ There’s an ongoing issue where rwdata partition is getting full, triggering some issues like settings going back to defaults and/or problems with upgrading to a different version. Check these threads for reference and workarounds: > > - [Version 22251 Issues Arising?](https://community.cyanlabs.net/t/version-22251-issues-arising/8584) > - [Some APIM Settings Going Back to Default](https://community.cyanlabs.net/t/some-settings-going-back-to-default/8229) > > Also, make sure to check F150Chief’s tutorial about the available recovery procedures: [APIM Sync Settings Not Saving, VER\_ERR08 Errors, Cannot Perform Master Reset or Upgrades/Updates](https://community.cyanlabs.net/t/apim-sync-settings-not-saving-ver-err08-errors-cannot-perform-master-reset-or-upgrades-updates/8858). > > It’s not yet clear if this is 3.4.22251 specific or not, users that got those issues are currently testing other builds. As said before, this is still ongoing. ---
**Author:** ![system](https://community.cyanlabs.net/letter_avatar_proxy/v4/letter/s/bcef8e/32.png) [@system](https://community.cyanlabs.net/u/system)\ **Post date:** [10 May 2023 22:34 UTC](https://community.cyanlabs.net/t/moving-back-to-3-3-from-latest-version/9082/6 "2023-05-10T22:34:33Z")
Closed on 10 May 2023 22:34 UTC This topic was automatically closed 3 days after the last reply. New replies are no longer allowed.