# Moving back to 3.3 from latest version **URL:** \ **Category:** SYNC 3 Support\ **Tags:** SYNC3, APIM\ **Created:** [7 May 2023 17:21 UTC](https://community.cyanlabs.net/t/moving-back-to-3-3-from-latest-version/9082 "2023-05-07T17:21:33Z")\ **Posts on this page:** 1\ **Showing post:** 5
**Author:** ![SaNdMaN](https://community.cyanlabs.net/user_avatar/community.cyanlabs.net/sandman/32/3220_2.png) [@SaNdMaN](https://community.cyanlabs.net/u/SaNdMaN)\ **Post date:** [7 May 2023 22:34 UTC](https://community.cyanlabs.net/t/moving-back-to-3-3-from-latest-version/9082/5 "2023-05-07T22:34:00Z")
This is not the place for this discussion. Review the following quote, if anything else is needed post in one of those threads which cover that issue (not the tutorial, of course). > [@Sync 3.4.22251 - Feedback & Issues](https://community.cyanlabs.net/t/sync-3-4-22251-feedback-issues/6515/1): > > # Community Spotted Issues > > ⚠ There’s an ongoing issue where rwdata partition is getting full, triggering some issues like settings going back to defaults and/or problems with upgrading to a different version. Check these threads for reference and workarounds: > > - [Version 22251 Issues Arising?](https://community.cyanlabs.net/t/version-22251-issues-arising/8584) > - [Some APIM Settings Going Back to Default](https://community.cyanlabs.net/t/some-settings-going-back-to-default/8229) > > Also, make sure to check F150Chief’s tutorial about the available recovery procedures: [APIM Sync Settings Not Saving, VER\_ERR08 Errors, Cannot Perform Master Reset or Upgrades/Updates](https://community.cyanlabs.net/t/apim-sync-settings-not-saving-ver-err08-errors-cannot-perform-master-reset-or-upgrades-updates/8858). > > It’s not yet clear if this is 3.4.22251 specific or not, users that got those issues are currently testing other builds. As said before, this is still ongoing. --- _[View the full topic](https://community.cyanlabs.net/t/moving-back-to-3-3-from-latest-version/9082)._