# Sync 3.4.22200 - Feedback & Issues **URL:** \ **Category:** Ford\ **Tags:** SYNC3, APIM\ **Created:** [25 August 2022 18:22 UTC](https://community.cyanlabs.net/t/sync-3-4-22200-feedback-issues/5865 "2022-08-25T18:22:30Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![CyanLabs](https://community.cyanlabs.net/user_avatar/community.cyanlabs.net/cyanlabs/32/15113_2.png) [@CyanLabs](https://community.cyanlabs.net/u/CyanLabs)\ **Post date:** [25 August 2022 18:22 UTC](https://community.cyanlabs.net/t/sync-3-4-22200-feedback-issues/5865/1 "2022-08-25T18:22:30Z")
# Introduction **Sync 3.4.22200** has been found online and added to Syn3 Updater! For each new release a specific thread will be created, please use this thread to post any feedback or issues you have noticed for the corresponding release. # Important Notes This release contains new Voice packages # Rules - Do not reply to this thread with general issues that are not specific to 3.4.22200 - If you notice a bug or change specific to this feature report it below Failure to follow the above rules will result in your post either being moved (if moderators or myself are feeling generous or deleted without prompt) To clarify, MEM\_ERR’s, Missing Logos, LST\_ERRS etc should not be posted here, make a new thread using this [Support Link](https://community.cyanlabs.net/w/issue-with-sync3) # Install Methods ## Syn3 Updater You can update using Syn3 Updater > **[Syn3 Updater - CyanLabs](https://cyanlabs.net/applications/syn3updater/)** > > Syn3 Updater is a Windows application that will make your life easier when attempting to update your Ford SYNC powered car to version 3.4! ![image](https://community.cyanlabs.net/uploads/default/original/2X/9/9f21b8baf6eb725596f2948c6dbb57dd0b403f55.jpeg) ### Quick Links China : [syn3updater://Region=CN;Release=3.4.22200](syn3updater://Region=CN;Release=3.4.22200) Europe: [syn3updater://Region=EU;Release=3.4.22200](syn3updater://Region=EU;Release=3.4.22200) North America: [syn3updater://Region=NA;Release=3.4.22200](syn3updater://Region=NA;Release=3.4.22200) Australia: [syn3updater://Region=ANZ;Release=3.4.22200](syn3updater://Region=ANZ;Release=3.4.22200) ROW: [syn3updater://Region=ROW;Release=3.4.22200](syn3updater://Region=ROW;Release=3.4.22200) ## Manual Method It’s also added to the manual method available at the below link > **[Easily Update your SYNC 3 using our Manual Method - CyanLabs](https://cyanlabs.net/tutorials/sync-3-manual-method-update-to-3-4/)** > > A guide on manually updating your Ford Sync 3 based car to the latest Sync 3.4 version with the latest available maps. ## App Package URL [https://cyanlabs.net/fhub/sync3-apim-sw-db/?ivsu=NU5T-14G381-AA](https://cyanlabs.net/fhub/sync3-apim-sw-db/?ivsu=NU5T-14G381-AA) # Official Issues TBC # Community Spotted Issues TBC # Community Spotted Changes TBC # Technical Information from FMods Package Name: NU5T-14G381-AA Epoch: 1660780450000 Major Version: 3.4 Build: 22200 Build Date: 2022-19-07 Package Date: 2022-08-17 Release Date: 2022-08-24 List of Changed files: [https://pastebin.com/5vRLth26](https://pastebin.com/5vRLth26) Visible Changes: Nothing Changes (based on diff): - Updated some ifs, some bins and some libs Most important thing: Does JB works? Yes ---
**Author:** ![CyanLabs](https://community.cyanlabs.net/user_avatar/community.cyanlabs.net/cyanlabs/32/15113_2.png) [@CyanLabs](https://community.cyanlabs.net/u/CyanLabs)\ **Post date:** [25 August 2022 18:45 UTC](https://community.cyanlabs.net/t/sync-3-4-22200-feedback-issues/5865/2 "2022-08-25T18:45:32Z")
---
**Author:** ![CyanLabs](https://community.cyanlabs.net/user_avatar/community.cyanlabs.net/cyanlabs/32/15113_2.png) [@CyanLabs](https://community.cyanlabs.net/u/CyanLabs)\ **Post date:** [25 August 2022 19:14 UTC](https://community.cyanlabs.net/t/sync-3-4-22200-feedback-issues/5865/4 "2022-08-25T19:14:26Z")
This information came from @avdonr in my discord ---
**Author:** ![F150Chief](https://community.cyanlabs.net/user_avatar/community.cyanlabs.net/f150chief/32/14712_2.png) [@F150Chief](https://community.cyanlabs.net/u/F150Chief)\ **Post date:** [25 August 2022 19:16 UTC](https://community.cyanlabs.net/t/sync-3-4-22200-feedback-issues/5865/5 "2022-08-25T19:16:16Z")
Those versions are already released and old. No JB talk here, thanks. ---
**Author:** ![Rollback\_Jockey](https://community.cyanlabs.net/user_avatar/community.cyanlabs.net/rollback_jockey/32/2479_2.png) [@Rollback\_Jockey](https://community.cyanlabs.net/u/Rollback_Jockey)\ **Post date:** [26 August 2022 07:28 UTC](https://community.cyanlabs.net/t/sync-3-4-22200-feedback-issues/5865/7 "2022-08-26T07:28:38Z")
You do realise you’re lecturing ADMIN about having mentioned something you claimed not to have mentioed? ---
**Author:** ![Richard\_Bwd](https://community.cyanlabs.net/user_avatar/community.cyanlabs.net/richard_bwd/32/13317_2.png) [@Richard\_Bwd](https://community.cyanlabs.net/u/Richard_Bwd)\ **Post date:** [26 August 2022 08:36 UTC](https://community.cyanlabs.net/t/sync-3-4-22200-feedback-issues/5865/8 "2022-08-26T08:36:21Z")
I know we can not discuss that topic over here i only stated to the JB questipon if it is possible or not he knows now that it works ,thats all i did .And i am certanly not lecturing the Admin and the founder. And otherwise they can remove all of my comments about this. ---
**Author:** ![CyanLabs](https://community.cyanlabs.net/user_avatar/community.cyanlabs.net/cyanlabs/32/15113_2.png) [@CyanLabs](https://community.cyanlabs.net/u/CyanLabs)\ **Post date:** [26 August 2022 10:01 UTC](https://community.cyanlabs.net/t/sync-3-4-22200-feedback-issues/5865/9 "2022-08-26T10:01:04Z")
FWIW the info came from Auron (FMods) if the JB works, cool, his info on my discord server says “not tested” therefore thats the status until i have confirmation from him or someone i trust that it works. we can say if it works or not but we do not discuss any further, end of! ---
**Author:** ![burkett375](https://community.cyanlabs.net/user_avatar/community.cyanlabs.net/burkett375/32/5801_2.png) [@burkett375](https://community.cyanlabs.net/u/burkett375)\ **Post date:** [26 August 2022 18:46 UTC](https://community.cyanlabs.net/t/sync-3-4-22200-feedback-issues/5865/10 "2022-08-26T18:46:31Z")
I get an error when trying to update [Sync\_W09W3RMV\_1FM5K8HC1MGC26389.xml](https://community.cyanlabs.net/uploads/short-url/jHgP2vRnNlvy3pOHsVws3Eooq8V.xml) (11.0 KB) ![image](https://community.cyanlabs.net/uploads/default/original/2X/f/fe69b95843afa5dbe004e399b0952986be13330f.png) ---
**Author:** ![glennsamuel32](https://community.cyanlabs.net/letter_avatar_proxy/v4/letter/g/bbce88/32.png) [@glennsamuel32](https://community.cyanlabs.net/u/glennsamuel32)\ **Post date:** [27 August 2022 02:23 UTC](https://community.cyanlabs.net/t/sync-3-4-22200-feedback-issues/5865/11 "2022-08-27T02:23:34Z")
Thanks !! Flawless install in about 10 minutes… NA without navigation. ---
**Author:** ![F150Chief](https://community.cyanlabs.net/user_avatar/community.cyanlabs.net/f150chief/32/14712_2.png) [@F150Chief](https://community.cyanlabs.net/u/F150Chief)\ **Post date:** [27 August 2022 02:44 UTC](https://community.cyanlabs.net/t/sync-3-4-22200-feedback-issues/5865/12 "2022-08-27T02:44:47Z")
I looked up the VIN in Ford ETIS… Explorer 2020-, 3.0L GTDI TC V6 Petrol, Agate Black Metallic VIN Number: 1FM5K8HC1 **M** GC26389 **This is MY20, DO NOT USE REFORMAT TOOL.** DID didFormat=“ASCII” didType=“On-line Diagnostic Database Reference Number” didValue=“F110” responseLength=“24”\> Response\>DS- **1U5T-14G371-EE** \ This value indicates MY20 +. According to the XML, you are at Sync 3.4.22110. Installed files are: 5U5T-14G381-EZ 4U5T-14G421-CAD 4U5T-14G421-CBD 4U5T-14G421-CCD 4U5T-14G421-CDD 4U5T-14G421-CED 4U5T-14G421-CFD 4U5T-14G421-CGD 4U5T-14G421-CHD 4U5T-14G421-CJD 5U5T-14G391-CR 4U5T-14G422-CAJ 4U5T-14G422-CBJ 4U5T-14G422-CCJ 4U5T-14G423-CC You have NA2\_20 Maps installed. Since you cannot reformat, you must install the map download from Ford to update the NAV. But, checking the website shows the NA2\_21 maps are not available for your vehicle, at least not yet. [Ford - Sync3 Map Update (syncnavigation.com)](https://syncnavigation.com/ford/available-updates) ---
**Author:** ![MKFlyers2K](https://community.cyanlabs.net/user_avatar/community.cyanlabs.net/mkflyers2k/32/7382_2.png) [@MKFlyers2K](https://community.cyanlabs.net/u/MKFlyers2K)\ **Post date:** [27 August 2022 04:54 UTC](https://community.cyanlabs.net/t/sync-3-4-22200-feedback-issues/5865/13 "2022-08-27T04:54:01Z")
For troubleshooting purposes here is my setup. MY20 Sync 3.4 with factory navigation. UPDATE 08/30/22: Read entire post. From 08/26/22: MK here. Not sure what the JB talk is all about. Not sure what that is. But I can say upgrading to this version was something else. Took about 25 mins to install, once that was once my SXM stopped working. Performed a factory reset. After that it took a solid 5 or so mins for SXM to work right again. Then realized the SXM logos they updated in the previous version didn’t seem to exist in this version. So be ready to have to wait to get all the SXM logos again. Other than that, so far so good. If anything worse comes about ill report it. Now if we can figure out how to unlock those damn NA 2021 maps… REVISION 08/30/22: Figured out was JB was, that’s jailbreak, this doesn’t apply to me and would never consider doing it. If the APIM zonks out on you good luck getting that fixed under warranty. But continuing, I have went back to version 3.4.22110. The radio seemed to be just fine the night of install and the start of Saturday. However, when I hooked up my phone to Android Auto and set a destination via waze, the Navi worked for about 200 meters then refused to move any further. This could be a Google issue because I noticed that after reverting back to 22110 I have the same issue. But, the one thing that got me was, if I was streaming via the SXM app via AA, that too would also just stop working at random and any attempt to unplug the phone and plug it back in via USB would only fix that issue for only a quarter mile or so. Also, to be clear I live in the burbs and have strong service everywhere I went to. At this moment I am not liking the update and seriously considering resetting the phone to see if that could resolve. However, once I got to my destination on Saturday, I was there for about 45 mins to an hour. I come back to the car I turn it on. I get no radio, no splash screen not anything! I tried to turn off the car let the radio go “off” by opening the door, closing it waiting a few seconds and try again. Nothing! So at this point, I’m getting nervous the radio (APIM) died on me somehow and I have an unofficial release of the sync software on my radio. Potentially causing an issue with warranty. However once I got back home I relaxed for a bit, headed back out to the car to go somewhere else, the radio worked. Thank god. I immediately inserted the USB with 22110 on it and proceeded to install it. After about 25 mins it was done and the radio was back to working order. For good measure I factory reset the radio again and all is well. Since then I have had no issues with the radio turning on, SXM streaming is back to normal, but I still do have the issue with Waze. So in the end I recommend SKIPPING this update and wait for the following one. This update reminds me of the one that Ford let out to start summer of 21 where SXM part of the radio would decide to work or not at random. I vote to STAY AWAY from this update. It’s no good. ---
**Author:** ![Gmp](https://community.cyanlabs.net/user_avatar/community.cyanlabs.net/gmp/32/6941_2.png) [@Gmp](https://community.cyanlabs.net/u/Gmp)\ **Post date:** [28 August 2022 05:02 UTC](https://community.cyanlabs.net/t/sync-3-4-22200-feedback-issues/5865/14 "2022-08-28T05:02:44Z")
will this work in a 2018 ford fiesta, with 3.4.2119?, i like the new colors ---
**Author:** ![F150Chief](https://community.cyanlabs.net/user_avatar/community.cyanlabs.net/f150chief/32/14712_2.png) [@F150Chief](https://community.cyanlabs.net/u/F150Chief)\ **Post date:** [28 August 2022 18:15 UTC](https://community.cyanlabs.net/t/sync-3-4-22200-feedback-issues/5865/15 "2022-08-28T18:15:57Z")
Yes. It is just an upgrade from 3.4.21194 to 3.4.22200. ---
**Author:** ![bradlloyd](https://community.cyanlabs.net/user_avatar/community.cyanlabs.net/bradlloyd/32/13423_2.png) [@bradlloyd](https://community.cyanlabs.net/u/bradlloyd)\ **Post date:** [29 August 2022 13:45 UTC](https://community.cyanlabs.net/t/sync-3-4-22200-feedback-issues/5865/16 "2022-08-29T13:45:53Z")
Wow, the NAV voice is not understandable. It started telling me what turn to take and sounded alien. Don’t know if it’s just me but I’d pass on this update. I just muted nav audio and it still worked fine though. ---
**Author:** ![radiohouston](https://community.cyanlabs.net/user_avatar/community.cyanlabs.net/radiohouston/32/6729_2.png) [@radiohouston](https://community.cyanlabs.net/u/radiohouston)\ **Post date:** [29 August 2022 18:25 UTC](https://community.cyanlabs.net/t/sync-3-4-22200-feedback-issues/5865/17 "2022-08-29T18:25:08Z")
Switching between XM channels became suddenly impossible after installing this update. It got “stuck” on the last one I had listened to. Had to do a hard reboot of the system in order to change sources and be able to change channels. Hadn’t had that happen with previous versions before. ---
**Author:** ![bill32399](https://community.cyanlabs.net/user_avatar/community.cyanlabs.net/bill32399/32/2724_2.png) [@bill32399](https://community.cyanlabs.net/u/bill32399)\ **Post date:** [29 August 2022 18:45 UTC](https://community.cyanlabs.net/t/sync-3-4-22200-feedback-issues/5865/18 "2022-08-29T18:45:10Z")
I am getting that also. Or where you switch stations and it will do it but does not reflect the new channel. ---
**Author:** ![bravasx](https://community.cyanlabs.net/letter_avatar_proxy/v4/letter/b/0ea827/32.png) [@bravasx](https://community.cyanlabs.net/u/bravasx)\ **Post date:** [29 August 2022 18:56 UTC](https://community.cyanlabs.net/t/sync-3-4-22200-feedback-issues/5865/19 "2022-08-29T18:56:31Z")
Has anything been fixed on aftermarket cameras with the new version? Or does the picture remain dark? ---
**Author:** ![radiohouston](https://community.cyanlabs.net/user_avatar/community.cyanlabs.net/radiohouston/32/6729_2.png) [@radiohouston](https://community.cyanlabs.net/u/radiohouston)\ **Post date:** [29 August 2022 19:00 UTC](https://community.cyanlabs.net/t/sync-3-4-22200-feedback-issues/5865/20 "2022-08-29T19:00:31Z")
Yes! I’ve seen that behavior as well. ---
**Author:** ![Jan\_Christensen](https://community.cyanlabs.net/user_avatar/community.cyanlabs.net/jan_christensen/32/6987_2.png) [@Jan\_Christensen](https://community.cyanlabs.net/u/Jan_Christensen)\ **Post date:** [1 September 2022 20:49 UTC](https://community.cyanlabs.net/t/sync-3-4-22200-feedback-issues/5865/21 "2022-09-01T20:49:39Z")
Sorry this of topic question. Today i where at ford for service. The car need 2 update. one for the front camera, and for the soundsystem. But they told me that after the new update of sync it will update all in the car from sync through wifi. i dont believe them or is that true ?! Like in Mustang get all updates by wifi ---
**Author:** ![bill32399](https://community.cyanlabs.net/user_avatar/community.cyanlabs.net/bill32399/32/2724_2.png) [@bill32399](https://community.cyanlabs.net/u/bill32399)\ **Post date:** [1 September 2022 20:58 UTC](https://community.cyanlabs.net/t/sync-3-4-22200-feedback-issues/5865/22 "2022-09-01T20:58:56Z")
Doubt anyone will really know until you tell us what model and year of the car. [Next page](https://community.cyanlabs.net/t/sync-3-4-22200-feedback-issues/5865.md?page=2)