# Sync 3.4.26057 - Feedback & Issues **URL:** \ **Category:** Ford\ **Tags:** SYNC3, APIM, Syn3Updater\ **Created:** [19 May 2026 13:31 UTC](https://community.cyanlabs.net/t/sync-3-4-26057-feedback-issues/26375 "2026-05-19T13:31:11Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![CyanLabs](https://community.cyanlabs.net/user_avatar/community.cyanlabs.net/cyanlabs/32/15113_2.png) [@CyanLabs](https://community.cyanlabs.net/u/CyanLabs)\ **Post date:** [19 May 2026 13:31 UTC](https://community.cyanlabs.net/t/sync-3-4-26057-feedback-issues/26375/1 "2026-05-19T13:31:11Z")
# Introduction **Sync 3.4.26057** has been found online and added to Syn3 Updater! thanks once again to @AuRoN ![image](https://community.cyanlabs.net/uploads/default/original/2X/9/92ea9185cd2ad1bee4aaa4b572285734a132db66.jpeg) For each new release a specific thread will be created, please use this thread to post any feedback or issues you have noticed for the corresponding release. # Important Notes This release only updates the APP package # Rules - Do not reply to this thread with general issues that are not specific to 3.4.26057 - If you notice a bug or change specific to this feature report it below Failure to follow the above rules will result in your post either being moved (if moderators or myself are feeling generous) or deleted without prompt To clarify, MEM\_ERR’s, Missing Logos, LST\_ERRS etc should not be posted here, make a new thread using this [Support Link](https://community.cyanlabs.net/w/issue-with-sync3) # Install Methods ## Syn3 Updater You can update using Syn3 Updater > **[Syn3 Updater - CyanLabs](https://cyanlabs.net/applications/syn3updater/)** > > Syn3 Updater is a Windows application that will make your life easier when attempting to update your Ford SYNC powered car to version 3.4! ### Quick Links China : [syn3updater://Region=CN;Release=3.4.26057](syn3updater://Region=CN;Release=3.4.26057) Europe: [syn3updater://Region=EU;Release=3.4.26057](syn3updater://Region=EU;Release=3.4.26057) North America: [syn3updater://Region=NA;Release=3.4.26057](syn3updater://Region=NA;Release=3.4.26057) Australia: [syn3updater://Region=ANZ;Release=3.4.26057](syn3updater://Region=ANZ;Release=3.4.26057) ROW: [syn3updater://Region=ROW;Release=3.4.26057](syn3updater://Region=ROW;Release=3.4.26057) ## Manual Method It’s also added to the manual method available at the below link > **[Easily Update your SYNC 3 using our Manual Method - CyanLabs](https://cyanlabs.net/tutorials/sync-3-manual-method-update-to-3-4/)** > > A guide on manually updating your Ford Sync 3 based car to the latest Sync 3.4 version with the latest available maps. ## App Package URL [https://cyanlabs.net/fhub/sync3-apim-sw-db/?ivsu=NU5T-14G381-AE](https://cyanlabs.net/fhub/sync3-apim-sw-db/?ivsu=NU5T-14G381-AE) ## SYNC 3 Common Issues and FAQ’s > **[SYNC 3 FAQ's and Common Issues - CyanLabs](https://cyanlabs.net/fhub/sync3/faq/)** > > Having an issue with your FORD Sync 3 unit? Check here for our most common questions and issues # Official Issues TBC # Community Spotted Issues TBC # Community Spotted Changes TBC # Technical Information from FMods **Package Name** : NU5T-14G381-AE **Epoch** : NU5T-14G381-AE\_1778770590000 **Major Version** : 3.4 **Build** : 26057 **Build Date** : 2026-02-26 **Package Date** : 2026-05-14 **Release Date** : 2026-05-16 **List of Changed files** : [M Manifest.txtM NAV/Job2/libitypeproxy.libM Version.infM apps/HMI\_ALM ap - Pastebin.com](https://pastebin.com/KzanzA7r) **Changes (based on diff):** - Updated several libs, bin, and ifs **Linked voice package:** NOT YET AVAILABLE, IF ANY **Most important thing:** Does JB works? YES (thanks to Radzio442 for insta-testing it) ---
**Author:** ![CyanLabs](https://community.cyanlabs.net/user_avatar/community.cyanlabs.net/cyanlabs/32/15113_2.png) [@CyanLabs](https://community.cyanlabs.net/u/CyanLabs)\ **Post date:** [19 May 2026 13:32 UTC](https://community.cyanlabs.net/t/sync-3-4-26057-feedback-issues/26375/2 "2026-05-19T13:32:37Z")
Pinned globally on 19 May 2026 13:32 UTC ---
**Author:** ![wiz043](https://community.cyanlabs.net/user_avatar/community.cyanlabs.net/wiz043/32/14863_2.png) [@wiz043](https://community.cyanlabs.net/u/wiz043)\ **Post date:** [20 May 2026 04:08 UTC](https://community.cyanlabs.net/t/sync-3-4-26057-feedback-issues/26375/3 "2026-05-20T04:08:13Z")
Downloaded 3.4.26057 though Cyanlabs. All seems ok. Seems much the same as previous version. Do you know of any obvious software changes at all please. 🙂 [log-2026-05-20-12-20-38.txt](https://community.cyanlabs.net/uploads/short-url/xZupS3g6Y88f7y0gonfwSLw5zMp.txt) (4.0 KB) ---
**Author:** ![bill32399](https://community.cyanlabs.net/user_avatar/community.cyanlabs.net/bill32399/32/2724_2.png) [@bill32399](https://community.cyanlabs.net/u/bill32399)\ **Post date:** [20 May 2026 04:20 UTC](https://community.cyanlabs.net/t/sync-3-4-26057-feedback-issues/26375/4 "2026-05-20T04:20:01Z")
Some Sirius stuff but not sure exactly what yet. ---
**Author:** ![PCP](https://community.cyanlabs.net/letter_avatar_proxy/v4/letter/p/b5a626/32.png) [@PCP](https://community.cyanlabs.net/u/PCP)\ **Post date:** [20 May 2026 18:21 UTC](https://community.cyanlabs.net/t/sync-3-4-26057-feedback-issues/26375/5 "2026-05-20T18:21:11Z")
Good afternoon and many thanks to the team…for all the dedication and effort on behalf of the community. I updated…it went very well, successfully. I can’t see the differences. If anyone could please help, I would be grateful. Thank you very much. From Portugal. ---
**Author:** ![CyanLabs](https://community.cyanlabs.net/user_avatar/community.cyanlabs.net/cyanlabs/32/15113_2.png) [@CyanLabs](https://community.cyanlabs.net/u/CyanLabs)\ **Post date:** [20 May 2026 22:58 UTC](https://community.cyanlabs.net/t/sync-3-4-26057-feedback-issues/26375/6 "2026-05-20T22:58:20Z")
Ask ford, we don’t have changelogs. ---
**Author:** ![SaNdMaN](https://community.cyanlabs.net/user_avatar/community.cyanlabs.net/sandman/32/3220_2.png) [@SaNdMaN](https://community.cyanlabs.net/u/SaNdMaN)\ **Post date:** [20 May 2026 23:12 UTC](https://community.cyanlabs.net/t/sync-3-4-26057-feedback-issues/26375/7 "2026-05-20T23:12:19Z")
> [@PCP](#): > > I can’t see the differences When was the last time you actually saw a difference in a 3.4 upgrade beside the build number in the about sync screen? ---
**Author:** ![ryansizemore](https://community.cyanlabs.net/user_avatar/community.cyanlabs.net/ryansizemore/32/19583_2.png) [@ryansizemore](https://community.cyanlabs.net/u/ryansizemore)\ **Post date:** [21 May 2026 02:30 UTC](https://community.cyanlabs.net/t/sync-3-4-26057-feedback-issues/26375/8 "2026-05-21T02:30:43Z")
I’ve done both the manual and automatic method. I’ve formatted the USB correctly. I did find in the file names in the manual method were not capitalized in the file but were in the auto install file (1u5t-14g386-cb.tar) was the file. That was fixed. I did the automatic method and no issues there but now the USB isn’t recognized in the car. Neither USB port. Am I being impatient or is it not working? I go to sources and look for USB and nothing. I plugged in a small 8gb usb with music and it works. Curious what could be the problem? Thoughts? ---
**Author:** ![F150Chief](https://community.cyanlabs.net/user_avatar/community.cyanlabs.net/f150chief/32/14712_2.png) [@F150Chief](https://community.cyanlabs.net/u/F150Chief)\ **Post date:** [21 May 2026 03:57 UTC](https://community.cyanlabs.net/t/sync-3-4-26057-feedback-issues/26375/9 "2026-05-21T03:57:38Z")
Master Reset of the APIM. ---
**Author:** ![warlock12118](https://community.cyanlabs.net/letter_avatar_proxy/v4/letter/w/e95f7d/32.png) [@warlock12118](https://community.cyanlabs.net/u/warlock12118)\ **Post date:** [21 May 2026 14:33 UTC](https://community.cyanlabs.net/t/sync-3-4-26057-feedback-issues/26375/10 "2026-05-21T14:33:19Z")
Lets see. 1. L series APIM with the “old” eMC. Sirius logos were completely “gone’”, even a master reset didn’t fix it. What did clean it up was doing a module reset, this triggered a “Sirius Subscription Updated” message and the logos came back. 2. the front park assist sensors have gotten a bit out of whack, eg sitting at a 3 way intersection that I always drive, no cars passing in front I’ll get a left flank warning, then a right flank warning followed by a right nose warning. I’ll dig more into that this weekend. ---
**Author:** ![Rafael\_Scheid](https://community.cyanlabs.net/letter_avatar_proxy/v4/letter/r/e5b9ba/32.png) [@Rafael\_Scheid](https://community.cyanlabs.net/u/Rafael_Scheid)\ **Post date:** [23 May 2026 14:15 UTC](https://community.cyanlabs.net/t/sync-3-4-26057-feedback-issues/26375/12 "2026-05-23T14:15:31Z")
Update from 3.4.22200 went well with Syn3Updater, but maps are not loading and GPS signal is now always off on the Sync Nav. When I upgraded from Sync 1 to Sync 3 I installed a GPS antenna that has always given open circuit DTC but always worked. Sometimes it did show GPS OFF on the screen and sometimes it loses position for a while (both in Nav and CarPlay), coming back a bit later. It never bothered me. But today GPS is always off on Sync Nav and map won’t load. I tried typing an address and it does locate cities and shows the map for the search, but won’t locate specific addresses. On CarPlay it still works. At least it was showing my position correctly, gonna drive around a bit now to check full work. I did a master reset, still the same. I’ll try creating a new USB drive and reinstall it. Any other ideas? Thanks for everything. Cyanlabs work and community are awesome! ---
**Author:** ![warlock12118](https://community.cyanlabs.net/letter_avatar_proxy/v4/letter/w/e95f7d/32.png) [@warlock12118](https://community.cyanlabs.net/u/warlock12118)\ **Post date:** [23 May 2026 17:46 UTC](https://community.cyanlabs.net/t/sync-3-4-26057-feedback-issues/26375/13 "2026-05-23T17:46:35Z")
Follow up on the parking sensors falsing. This cleared after pulling the battery cable for 35 minutes. ---
**Author:** ![Rafael\_Scheid](https://community.cyanlabs.net/letter_avatar_proxy/v4/letter/r/e5b9ba/32.png) [@Rafael\_Scheid](https://community.cyanlabs.net/u/Rafael_Scheid)\ **Post date:** [24 May 2026 00:47 UTC](https://community.cyanlabs.net/t/sync-3-4-26057-feedback-issues/26375/16 "2026-05-24T00:47:42Z")
Follow up on issue loading maps in Sync Nav, after several minutes rolling with the car, before any attempt of reinstall, it started loading the maps and accepted searching specific addresses. No idea what happened. ---
**Author:** ![jamynshanley](https://community.cyanlabs.net/user_avatar/community.cyanlabs.net/jamynshanley/32/16694_2.png) [@jamynshanley](https://community.cyanlabs.net/u/jamynshanley)\ **Post date:** [30 May 2026 00:23 UTC](https://community.cyanlabs.net/t/sync-3-4-26057-feedback-issues/26375/22 "2026-05-30T00:23:06Z")
No issues so far, updating from 3.4.23188. [log.txt](https://community.cyanlabs.net/uploads/short-url/7DbFofpza8aRNJEIHqsFKY3YLOk.txt) (3.6 KB) ---
**Author:** ![bravasx](https://community.cyanlabs.net/letter_avatar_proxy/v4/letter/b/0ea827/32.png) [@bravasx](https://community.cyanlabs.net/u/bravasx)\ **Post date:** [4 June 2026 19:26 UTC](https://community.cyanlabs.net/t/sync-3-4-26057-feedback-issues/26375/23 "2026-06-04T19:26:51Z")
Hi, I’ve been using a third-party camera with Sync 3.4.20xxx for years, back when it was still properly supported. With every update since then, the camera screen has remained blank. I’ve now installed the latest version, and suddenly I see a black-and-white image that looks like it’s from an old security camera. That’s progress, at least. But after about 10 seconds, the image cuts out and a message appears saying, “The camera was not recognized.” My question: Has anyone here retrofitted a camera (preferably for a Ford S-Max) and had it work? Maybe switching to a different camera model will do the trick, or I’ll have to roll back to the previous version. Or has a idea what can i do? ---
**Author:** ![MatrixTeam](https://community.cyanlabs.net/letter_avatar_proxy/v4/letter/m/977dab/32.png) [@MatrixTeam](https://community.cyanlabs.net/u/MatrixTeam)\ **Post date:** [5 June 2026 05:55 UTC](https://community.cyanlabs.net/t/sync-3-4-26057-feedback-issues/26375/24 "2026-06-05T05:55:26Z")
Ford Sync 3 build 3.4.26057 is a maintenance update rather than a major feature release. While **Ford does not provide a public line-by-line changelog** , community and developer tracking indicates that this build primarily focuses on **SiriusXM logo and subscription fixes** , **under-the-hood bug squashing** , and stability improvements. ---
**Author:** ![CyanLabs](https://community.cyanlabs.net/user_avatar/community.cyanlabs.net/cyanlabs/32/15113_2.png) [@CyanLabs](https://community.cyanlabs.net/u/CyanLabs)\ **Post date:** [7 June 2026 10:39 UTC](https://community.cyanlabs.net/t/sync-3-4-26057-feedback-issues/26375/25 "2026-06-07T10:39:59Z")
This screams AI, Source? ---
**Author:** ![MatrixTeam](https://community.cyanlabs.net/letter_avatar_proxy/v4/letter/m/977dab/32.png) [@MatrixTeam](https://community.cyanlabs.net/u/MatrixTeam)\ **Post date:** [7 June 2026 13:11 UTC](https://community.cyanlabs.net/t/sync-3-4-26057-feedback-issues/26375/26 "2026-06-07T13:11:16Z")
Yes - from Google, most of the members on here don’t know how to use it, or you can ask Ford. Its just a maintenance update ---
**Author:** ![kennyk](https://community.cyanlabs.net/user_avatar/community.cyanlabs.net/kennyk/32/20255_2.png) [@kennyk](https://community.cyanlabs.net/u/kennyk)\ **Post date:** [7 June 2026 21:45 UTC](https://community.cyanlabs.net/t/sync-3-4-26057-feedback-issues/26375/28 "2026-06-07T21:45:34Z")
I just upgraded sync 2 to 3. updated to latest version and updated maps no problem. However, i have one issue and its the volume knob. I get a rectangle bar that adjusts the volume but that overlays a round volume dial… any clue as to how to fix or get rid of that? ---
**Author:** ![bill32399](https://community.cyanlabs.net/user_avatar/community.cyanlabs.net/bill32399/32/2724_2.png) [@bill32399](https://community.cyanlabs.net/u/bill32399)\ **Post date:** [7 June 2026 21:57 UTC](https://community.cyanlabs.net/t/sync-3-4-26057-feedback-issues/26375/29 "2026-06-07T21:57:20Z")
> [@kennyk](#): > > I get a rectangle bar that adjusts the volume but that overlays a round volume dial… any clue as to how to fix or get rid of that? Did it do this before the update? If so than start a new thread on that as it does not belong in this thread. [Next page](https://community.cyanlabs.net/t/sync-3-4-26057-feedback-issues/26375.md?page=2)