# Transit Connect 2015 XLT Wagon No APIM **URL:** \ **Category:** Discussion\ **Tags:** help, asbuilt, HVAC, retrofit, na, pre-my20, APIM\ **Created:** [18 January 2026 07:10 UTC](https://community.cyanlabs.net/t/transit-connect-2015-xlt-wagon-no-apim/24790 "2026-01-18T07:10:07Z")\ **Posts on this page:** 5\ **Page:** 1
**Author:** ![doitfordale](https://community.cyanlabs.net/letter_avatar_proxy/v4/letter/d/a87d85/32.png) [@doitfordale](https://community.cyanlabs.net/u/doitfordale)\ **Post date:** [18 January 2026 07:10 UTC](https://community.cyanlabs.net/t/transit-connect-2015-xlt-wagon-no-apim/24790/1 "2026-01-18T07:10:07Z")
Hello, Thanks for the opportunity to participate in this community. I’m trying to figure out whether I can add an APIM to my 2015 TC XLT Wagon which I don’t believe has one. It has the 4-inch display with no phone connectivity. Would be great if I can get a larger screen while I’m at it. It has manual HVAC controls currently. I downloaded the asbuilt from Motorcraft based on my vin, below is the html version. Really just trying to figure out what my options are and a shopping list for the junk yard. Any guidance is appreciated. PCM Modules PCM 1 FFFF FFFF FF0C PCM 2 FFFF FFFF FF0D PCM 3 FFFF 0FFF 2F4E PCM 4 FFFF 1F33 FF63 PCM 5 FFFF FFFF FF10 PCM 6 FFFF FFFF FF11 PCM 7 FFFF FFFF FF12 PCM 8 FFFF FFFF FF13 PCM 9 FFFF FFFF FF14 BCE Modules Module Address Instructions ``` 7A5-01-01 0308 600E 0027 7A5-01-02 0000 AF 7A5-02-01 0005 5553 5C 7A5-03-01 00B0 7B1-01-01 0072 0109 36 7B1-02-01 0102 0103 01C3 7B1-02-02 0102 BF 7B1-03-01 50C8 D4 720-01-01 0000 0142 6C 720-02-01 3801 0509 0E7F 720-02-02 1217 1C21 26B7 720-02-03 2C32 3941 4A4E 720-02-04 5562 7285 9D78 720-02-05 BBE1 0000 00CA 720-02-06 002F 720-03-01 0000 000C 37 720-09-01 0000 00C0 F1 720-19-01 0105 090E 1270 720-19-02 171C 2126 2CE8 720-19-03 3239 414A 558E 720-19-04 6272 859D BBF5 720-19-05 E126 720-23-01 FCFF F3FE 37 726-01-01 5F14 0324 723B 726-01-02 0080 80B4 09ED 726-01-03 413C 1200 00C0 726-01-04 0161 0202 3CD4 726-01-05 090D 0000 0049 726-01-06 1041 0100 0086 726-01-07 0000 7D00 28DA 726-01-08 0000 0000 0036 726-01-09 0000 0000 0037 726-01-10 0000 0000 003E 726-02-01 0004 292C 89 726-03-01 0101 33 726-04-01 0100 33 726-05-01 0033 727-01-01 E800 2401 003D 727-01-02 0536 727-02-01 3465 727-03-01 1547 727-04-01 0001 0255 53DE 737-01-01 4E4D 3041 4591 737-01-02 3846 3738 4674 737-01-03 3132 3030 353A 737-01-04 3730 AA 737-02-01 4768 CE30 10FE 737-02-02 0C77 00C5 737-03-01 0F51 737-04-01 0043 737-05-01 C331 38 737-06-01 0D55 A7 760-01-01 4E4D 3041 45BA 760-01-02 3846 3738 469D 760-01-03 3132 3030 3563 760-01-04 3730 D3 ``` End of information ---
**Author:** ![F150Chief](https://community.cyanlabs.net/user_avatar/community.cyanlabs.net/f150chief/32/14712_2.png) [@F150Chief](https://community.cyanlabs.net/u/F150Chief)\ **Post date:** [18 January 2026 17:20 UTC](https://community.cyanlabs.net/t/transit-connect-2015-xlt-wagon-no-apim/24790/2 "2026-01-18T17:20:06Z")
You can retrofit Ford Sync 3 into a 2015 Transit Connect using a wiring kit from several vendors. Or, you can do the wiring yourself but it’s not a small task. As far as the Sync 3 functionality, not everything will be supported, especially in later versions for Sync 3.4, compatibility wise anyways. Overall the swap will work fine. I suggest you look into articles on the Transit forums specifically for your vehicle. There would be specific information about the addition or swap of Sync 3 into a Transit Connect and the required programming. Although you will need to acquire the wiring from someone to do this, you can purchase the other parts such as the APIM, ACM, Etc., likely significantly cheaper than from the kit folks. [Forums - Ford Transit Connect Forum](https://fordtransitconnectforum.com/) [Ford Transit Connect General Discussion | Ford Transit USA Forum](https://www.fordtransitusaforum.com/forums/ford-transit-connect-general-discussion.75/) [Transit Connect Forum - Blue Oval Forums](https://blueovalforums.com/forums/index.php?/forum/97-transit-connect-forum/) [Ford Transit Forum • View forum - Transit Connect](https://fordtransit.org/forum/viewforum.php?f=54) [Search results for ‘transit connect Sync 3 #ford’ - CyanLabs Official Community](https://community.cyanlabs.net/search?q=transit%20connect%20Sync%203%20%23ford) ---
**Author:** ![doitfordale](https://community.cyanlabs.net/letter_avatar_proxy/v4/letter/d/a87d85/32.png) [@doitfordale](https://community.cyanlabs.net/u/doitfordale)\ **Post date:** [19 January 2026 04:14 UTC](https://community.cyanlabs.net/t/transit-connect-2015-xlt-wagon-no-apim/24790/3 "2026-01-19T04:14:28Z")
Based on what I’ve read so far it seems that all 2014-2018 TC’s in NA use the IPC as the gateway for CAN. I guess that means getting parts from 2019 or newer might mean that I’d need to also add a dedicated gateway module, which might not be feasible. I see a lot of different wiring harnesses on ebay and amazon but nothing really specific to Transit Connect. Since it is built on the same C1/B platform as Focus, C‑Max, and Fiesta, I guess I should be looking for harnesses compatible with those vehicles (that are CGEA 1.2). My last question is whether the fact that my vehicle has an OEM rear camera makes a difference and if I should use this as an opportunity to upgrade the rear camera since it looks like crap. ---
**Author:** ![bill32399](https://community.cyanlabs.net/user_avatar/community.cyanlabs.net/bill32399/32/2724_2.png) [@bill32399](https://community.cyanlabs.net/u/bill32399)\ **Post date:** [19 January 2026 04:44 UTC](https://community.cyanlabs.net/t/transit-connect-2015-xlt-wagon-no-apim/24790/4 "2026-01-19T04:44:43Z")
> [@doitfordale](#): > > it seems that all 2014-2018 TC’s in NA use the IPC as the gateway for CAN This is the CGEA 1.2 network you have. It will only use the IPC for the ICAN network. The MS and HS networks come from the BCM. There is no gateway module and you cannot add one. The module calibrations would not talk correctly if you plug one in. You are partially correct on parts from a CGEA 1.3 network working on a CGEA 1.2 network. Some modules will without problem but MOST will not. The small amount that do work allow the AB to be changed to 1.3 and that is why. When I say small amount I mean like 2 or 3 modules. ---
**Author:** ![doitfordale](https://community.cyanlabs.net/letter_avatar_proxy/v4/letter/d/a87d85/32.png) [@doitfordale](https://community.cyanlabs.net/u/doitfordale)\ **Post date:** [5 March 2026 09:47 UTC](https://community.cyanlabs.net/t/transit-connect-2015-xlt-wagon-no-apim/24790/5 "2026-03-05T09:47:07Z")
Found a 2014 TC with 6.5” screen. Got the APIM, Screen, FCIM, Bezel, Bracket, Center Dash Cover, CD Player and Instrument Panel. Was unable to get the steering wheel or clockspring due to being out of town without all my tools. Will any steering wheel from a Sync 3 Focus/ Escape/ C-Max/ Fiesta/ Fusion work or do I need to find another 2014-2017 TC with right hand steering wheel buttons? Besides steering wheel and maybe clockspring I still need the USB 3.0 cable and hub that goes in front of cup holders next to E-Brake. I think I can buy that new for reasonable price though. Anything else I need besides harness? I’ve looked around on Transit Connect Forums about buying or making one. It seems like getting a cheap one with all the connectors and rewiring it if necessary is the best compromise between expense and effort. The only other thing I can think of is a GPS antenna but I’m not planning to use built in navigation and that’s the only thing that it’s needed for to my knowledge.