2015 Ford Falcon
Spec Configurations

Dimensions
Overall height: 1433mm (56.41 in)
Overall length: 4970mm (195.66 in)
Overall width: 1868mm (73.54 in)
Wheelbase: 2838mm (111.73 in)
Curb weight: 1815kg (3993 lbs)
Rear track: 1585mm (62.40 in)
Front track: 1583mm (62.32 in)


7D0-05-01	****	xxxx	xx--	Front Track (Inches)					HEX=DECx0.01+0=Value (in) 1858
7D0-05-01	xxxx	****	xx--	Rear Track (Inches)					HEX=DECx0.01+0=Value (in) 1860
7D0-05-01	xxxx	xxxx	**xx	Wheel Base (Inches)					HEX=DECx0.01+0=Value (in) 2BA5
7D0-05-02	**xx

7D0-07-01	**xx	xxxx	xx--	Vehicle Weight (Kg)					HEX=DECx100+0=Value (Kg) 18
7D0-07-01	xx**	xxxx	xx--	ECO Route Curve						HEX=DECx1+1=Value (unitless) 00
7D0-07-01	xxxx	**xx	xx--	Powertrain Efficiency (%)				HEX=DECx0.39215+0=Value (%) 33
7D0-07-01	xxxx	xx**	xx--	Regenerative Braking Efficiency Highway (%)	HEX=DECx0.39215+0=Value (%) 00
7D0-07-01	xxxx	xxxx	**--	Regenerative Braking Efficiency City (%)		HEX=DECx0.39215+0=Value (%) 00

7D0-07-02	****	xxxx	xx--	Install Angle of APIM for Accelerometer X (Deg)	HEX=DECx0.006+0=Value (degrees) 0000
7D0-07-02	xxxx	****	xx--	Install Angle of APIM for Accelerometer Y (Deg)	HEX=DECx0.006+0=Value (degrees) 00FA
7D0-07-02	xxxx	xxxx	**--	Install Angle of APIM for Accelerometer Z (Deg)	HEX=DECx0.006+0=Value (degrees) 00

7D0-07-03	**xx	xxxx	xx--	Install Angle of APIM for Accelerometer Z (Deg) cont.	
7D0-07-03	xx**	xxxx	xx--	Wheel Ticks to Revolution Front			HEX=DECx1+40=Value (unitless) 56
7D0-07-03	xxxx	**xx	xx--	Wheel Ticks to Revolution Rear			HEX=DECx1+40=Value (unitless) 56
7D0-07-03	xxxx	xx**	xx--	Tire Circumference (cm)					HEX=DECx1+100=Value (cm) x0.393701=Value (in) 6D
7D0-07-03	xxxx	xxxx	**--	Distance from IP to Rear Axle (cm)			HEX=DECx1+100=Value (cm) x0.393701=Value (in) 006A

7D0-07-04	**xx			Distance from IP to Rear Axle (cm) cont.	


Change Block 5 to this:
;Block 5
7D0G5G1185818602B00
7D0G5G2A500

Block 7 looks ok:
;Block 7
7D0G7G1070033000019
7D0G7G2000000FA00DA
7D0G7G30056566D00FA
7D0G7G46A4C