2015 Ford Explorer Police Interceptor Utility

[Jacqueline]

Good Evening, okay guys, I can say yes, there were the wrong places for my posts here.
I discovered the mess is becoming I’m used to my mobile and now I’m using my PC, it’s so much different.

Okay, my car is 2015 Ford explorer Police Interceptor Utility, and I upgrade it to the passenger car.

(I upgraded) All factory parts.

• Instrument cluster.
  -Display Radio Climate. -Control Panel BEZEL
  -APIM MODULE and screen 8".
  AM FM Satellite Radio Receiver

• Temperature Control Module.

• 3rd row seats and more but I don’t remember now.
  The thing it’s was so hard for me it was the volume for radio, it’s was always on the high most of the time I was scare.

For the parts, I‘ve long time I’m trying to marry them the parts with car.
Every day, when something I’m fixing, other thing it’s breaks.
I don’t want to be boring,
in a few words

List items

strong text I don’t have a heat on my car and ether cool the AC doesn’t works, no air blowing and the big importing thing.

strong text THE COOLING FANS RADIATOR ARE NOT WORKING **
I’m sure I did something wrong on As Built.

• The button on steering for voice commands doesn’t work, but on my phone it’s working well.
• The seek button on steering doesn’t work.
• The Rear Parking Sensor doesn’t work, since I changed the bumper.
• I want showing Climate Control on the INSTRUMENT CLUSTER pleas.
  I have so many more, but later.

I’ll share all photos and the As Built too.
Please take a look and tell me step by step.
This is the last topic from me, if I don’t get help, because because I don’t like to push situations, and that means you don’t want me here.
Any help would be appreciated.

PLEASE DO NOT LOOK AT MY SPELLING AND MY EXPRESSION, I know, it’s not perfect.

1FM5K8AR1FGB20543_HVAC_20240403_134302.abt (283 Bytes)
1FM5K8AR1FGB20543_ACM_20240403_134013.abt (499 Bytes)
1FM5K8AR1FGB20543_APIM_20240403_133659.abt (401 Bytes)
1FM5K8AR1FGB20543_BdyCM_20240403_134045.abt (2.0 KB)
1FM5K8AR1FGB20543_GPSM_20240403_134357.abt (23 Bytes)
1FM5K8AR1FGB20543_IPC_20240403_134158.abt (171 Bytes)
1FM5K8AR1FGB20543_PCM_20240403_133811.abt (1.6 KB)
1FM5K8AR1FGB20543_PSCM_20240403_133953.abt (67 Bytes)
1FM5K8AR1FGB20543_RCM_20240403_133851.abt (255 Bytes)
1FM5K8AR1FGB20543_SCCM_20240403_134109.abt (261 Bytes)

Codes.txt (21.4 KB)

[SFRANCO (Hades)]

My suggestion is that you load your default as-built configuration again and then perform a diagnostic trouble code (DTC) deletion. then we can proceed to programming
also do a backup of each of the following before loading the om asbuilt
Instrument cluster.
-Display Radio Climate. -Control Panel BEZEL
-APIM MODULE and screen 8".

• AM FM Satellite Radio Receiver
  -Temperature Control Module.

[Jacqueline]

@SFRANCO

load your default as-built configuration again

I did that, a message comes up saying it doesn’t match.

[Jacqueline]

@SFRANCO

load your

do you mean load factory?

[Rollback_Jockey]

I’d put all the original part’s back and start afresh and deal with issues one at a time.

[Jacqueline]

[SFRANCO (Hades)]

It is not possible to load all parts of your vehicle’s computer system simultaneously since the structure change when you added the diffrent parts . Each module needs to be manually loaded, especially the body control module, which is the main computer of your vehicle. If you have made any changes to the body control module, such as moving any bytes or digits, it could cause issues. Therefore, it’s important to load modules one by one to avoid any potential problems. If you have OEM parts that you have replaced, it’s recommended to add them back and start the process of elimination to determine what caused so many DTCs.

[SFRANCO (Hades)]

i tried sending a u msg but i think you have the option off

[Jacqueline]

@SFRANCO

msg

I don’t have any idea, can sending a message here??? ok let me I will try to turn it on

[Jacqueline]

But thank you so much for the help, now I’m finished with the parts, and tomorrow I will continue.