2021 Bronco sport PSCM

Hi,

I have a bronco sport big bend with an issue of a hard steering wheel due to a U3000 error code

I have beta forscan with an extended license and I tried to flash the firmware again but it’s not found in the database

I’m going to post full logs and attach the screenshots

Please help

===PCM DTC P0073:00-27===
Code: P0073 - Ambient Air Temperature Sensor Circuit A High

Status: 
 - DTC Present at Time of Request
 - Malfunction Indicator Lamp is Off for this DTC

Module: Powertrain Control Module

===END PCM DTC P0073:00-27===

===PCM DTC U0452:00-2F===
Code: U0452 - Invalid Data Received From Restraints Control Module

Status: 
 - DTC Present at Time of Request
 - Malfunction Indicator Lamp is Off for this DTC

Module: Powertrain Control Module

===END PCM DTC U0452:00-2F===

===OBDII DTC P0073-P===
Code: P0073 - Ambient Air Temperature Sensor Circuit A High

Status: 
 - Pending - malfunction is expected to be confirmed 

Module: On Board Diagnostic II

===END OBDII DTC P0073-P===

===APIM DTC None===
Successful DTC reading, no error codes found

Module: Accessory Protocol Interface Module

===END APIM DTC None===

===BdyCM DTC B121A:15-0A===
Code: B121A - Keypad Illumination Output

Additional Fault Symptom:
 - Circuit Short To Battery Or Open

Status: 
 - DTC Present at Time of Request
 - Malfunction Indicator Lamp is Off for this DTC

Module: Body Control Module

===END BdyCM DTC B121A:15-0A===

===BdyCM DTC B1336:01-0A===
Code: B1336 - Left Front Door External Antenna

Additional Fault Symptom:
 - General Electrical Failure

Status: 
 - DTC Present at Time of Request
 - Malfunction Indicator Lamp is Off for this DTC

Module: Body Control Module

===END BdyCM DTC B1336:01-0A===

===BdyCM DTC B14E7:08-0A===
Code: B14E7 - Right Front Enhanced Exterior Lighting System

Additional Fault Symptom:
 - Bus Signal/Message Failures

Status: 
 - DTC Present at Time of Request
 - Malfunction Indicator Lamp is Off for this DTC

Module: Body Control Module

===END BdyCM DTC B14E7:08-0A===

===BdyCM DTC B14E5:08-0A===
Code: B14E5 - Left Front Enhanced Exterior Lighting System

Additional Fault Symptom:
 - Bus Signal/Message Failures

Status: 
 - DTC Present at Time of Request
 - Malfunction Indicator Lamp is Off for this DTC

Module: Body Control Module

===END BdyCM DTC B14E5:08-0A===

===BECMB DTC None===
Successful DTC reading, no error codes found

Module: Battery Energy Control Module B

===END BECMB DTC None===

===AWD DTC None===
Successful DTC reading, no error codes found

Module: All Wheel Drive Module

===END AWD DTC None===

===SODR DTC None===
Successful DTC reading, no error codes found

Module: Side Obstacle Detection Control Module - Right

===END SODR DTC None===

===SODL DTC None===
Successful DTC reading, no error codes found

Module: Side Obstacle Detection Control Module - Left

===END SODL DTC None===

===ATCM DTC None===
Successful DTC reading, no error codes found

Module: All Terrain Control Module

===END ATCM DTC None===

===TRM DTC None===
Successful DTC reading, no error codes found

Module: Trailer Module

===END TRM DTC None===

===C-CM DTC None===
Successful DTC reading, no error codes found

Module: Cruise-Control Module

===END C-CM DTC None===

===ABS DTC U0100:00-2F===
Code: U0100 - Lost Communication With ECM/PCM A

Status: 
 - DTC Present at Time of Request
 - Malfunction Indicator Lamp is Off for this DTC

Module: Antilock braking system

 Freeze Frame :
-GLOBTIM: 34841631 s - Global real time
-TOTDIST: 22662.0 km - Total Distance
-MAINECUV: 12.00 V - Main ECU voltage supply
===END ABS DTC U0100:00-2F===

===ABS DTC U0452:00-2F===
Code: U0452 - Invalid Data Received From Restraints Control Module

Status: 
 - DTC Present at Time of Request
 - Malfunction Indicator Lamp is Off for this DTC

Module: Antilock braking system

 Freeze Frame :
-GLOBTIM: 34841627 s - Global real time
-TOTDIST: 22662.0 km - Total Distance
-MAINECUV: 12.00 V - Main ECU voltage supply
-OUTTMP: 21 °C - External Temperature From Sensor
===END ABS DTC U0452:00-2F===

===TCU DTC None===
Successful DTC reading, no error codes found

Module: Telematic Control Unit Module

===END TCU DTC None===

===RCM DTC B0050:13-AF===
Code: B0050 - Driver Seatbelt Sensor

Additional Fault Symptom:
 - Circuit Open

Status: 
 - DTC Present at Time of Request
 - Malfunction Indicator Lamp is On for this DTC

Module: Restraint Control Module

 Freeze Frame :
-GLOBTIM: 34842356 s - Global real time
-TOTDIST: 22662.0 km - Total Distance
-GLOBTIM: 34842356 s - Global real time
-TOTDIST: 22662.0 km - Total Distance
===END RCM DTC B0050:13-AF===

===RCM DTC B0052:13-AF===
Code: B0052 - Passenger Seatbelt Sensor

Additional Fault Symptom:
 - Circuit Open

Status: 
 - DTC Present at Time of Request
 - Malfunction Indicator Lamp is On for this DTC

Module: Restraint Control Module

 Freeze Frame :
-GLOBTIM: 34842356 s - Global real time
-TOTDIST: 22662.0 km - Total Distance
-GLOBTIM: 34842356 s - Global real time
-TOTDIST: 22662.0 km - Total Distance
===END RCM DTC B0052:13-AF===

===RCM DTC B0070:13-AF===
Code: B0070 - Driver Seatbelt Pretensioner A Deployment Control

Additional Fault Symptom:
 - Circuit Open

Status: 
 - DTC Present at Time of Request
 - Malfunction Indicator Lamp is On for this DTC

Module: Restraint Control Module

 Freeze Frame :
-GLOBTIM: 34842356 s - Global real time
-TOTDIST: 22662.0 km - Total Distance
-GLOBTIM: 34842356 s - Global real time
-TOTDIST: 22662.0 km - Total Distance
===END RCM DTC B0070:13-AF===

===RCM DTC B0072:13-AF===
Code: B0072 - Passenger Seatbelt Pretensioner A Deployment Control

Additional Fault Symptom:
 - Circuit Open

Status: 
 - DTC Present at Time of Request
 - Malfunction Indicator Lamp is On for this DTC

Module: Restraint Control Module

 Freeze Frame :
-GLOBTIM: 34842356 s - Global real time
-TOTDIST: 22662.0 km - Total Distance
-GLOBTIM: 34842356 s - Global real time
-TOTDIST: 22662.0 km - Total Distance
===END RCM DTC B0072:13-AF===

===RCM DTC B007E:13-AF===
Code: B007E - Driver Seatbelt Pretensioner C Deployment Control

Additional Fault Symptom:
 - Circuit Open

Status: 
 - DTC Present at Time of Request
 - Malfunction Indicator Lamp is On for this DTC

Module: Restraint Control Module

 Freeze Frame :
-GLOBTIM: 34842356 s - Global real time
-TOTDIST: 22662.0 km - Total Distance
-GLOBTIM: 34842356 s - Global real time
-TOTDIST: 22662.0 km - Total Distance
===END RCM DTC B007E:13-AF===

===RCM DTC B00B5:13-AF===
Code: B00B5 - Driver Seat Track Position Restraints Sensor

Additional Fault Symptom:
 - Circuit Open

Status: 
 - DTC Present at Time of Request
 - Malfunction Indicator Lamp is On for this DTC

Module: Restraint Control Module

 Freeze Frame :
-GLOBTIM: 34842356 s - Global real time
-TOTDIST: 22662.0 km - Total Distance
-GLOBTIM: 34842356 s - Global real time
-TOTDIST: 22662.0 km - Total Distance
===END RCM DTC B00B5:13-AF===

===RCM DTC B00C5:13-AF===
Code: B00C5 - Passenger Seat Track Position Restraints Sensor

Additional Fault Symptom:
 - Circuit Open

Status: 
 - DTC Present at Time of Request
 - Malfunction Indicator Lamp is On for this DTC

Module: Restraint Control Module

 Freeze Frame :
-GLOBTIM: 34842356 s - Global real time
-TOTDIST: 22662.0 km - Total Distance
-GLOBTIM: 34842356 s - Global real time
-TOTDIST: 22662.0 km - Total Distance
===END RCM DTC B00C5:13-AF===

===RCM DTC B1193:00-AF===
Code: B1193 - Crash Event Storage Full and Locked

Status: 
 - DTC Present at Time of Request
 - Malfunction Indicator Lamp is On for this DTC

Module: Restraint Control Module

 Freeze Frame :
-GLOBTIM: 34842350 s - Global real time
-TOTDIST: 22662.0 km - Total Distance
-GLOBTIM: 34842350 s - Global real time
-TOTDIST: 22662.0 km - Total Distance
===END RCM DTC B1193:00-AF===

===RCM DTC B1404:13-AF===
Code: B1404 - Driver Side Airbag Deployment Control

Additional Fault Symptom:
 - Circuit Open

Status: 
 - DTC Present at Time of Request
 - Malfunction Indicator Lamp is On for this DTC

Module: Restraint Control Module

 Freeze Frame :
-GLOBTIM: 34842356 s - Global real time
-TOTDIST: 22662.0 km - Total Distance
-GLOBTIM: 34842356 s - Global real time
-TOTDIST: 22662.0 km - Total Distance
===END RCM DTC B1404:13-AF===

===RCM DTC B1405:13-AF===
Code: B1405 - Driver Side Curtain Deployment Control 2

Additional Fault Symptom:
 - Circuit Open

Status: 
 - DTC Present at Time of Request
 - Malfunction Indicator Lamp is On for this DTC

Module: Restraint Control Module

 Freeze Frame :
-GLOBTIM: 34842356 s - Global real time
-TOTDIST: 22662.0 km - Total Distance
-GLOBTIM: 34842356 s - Global real time
-TOTDIST: 22662.0 km - Total Distance
===END RCM DTC B1405:13-AF===

===RCM DTC B1407:13-AF===
Code: B1407 - Passenger Side Airbag Deployment Control

Additional Fault Symptom:
 - Circuit Open

Status: 
 - DTC Present at Time of Request
 - Malfunction Indicator Lamp is On for this DTC

Module: Restraint Control Module

 Freeze Frame :
-GLOBTIM: 34842356 s - Global real time
-TOTDIST: 22662.0 km - Total Distance
-GLOBTIM: 34842356 s - Global real time
-TOTDIST: 22662.0 km - Total Distance
===END RCM DTC B1407:13-AF===

===RCM DTC B1408:2B-D0===
Code: B1408 - Passenger Side Curtain Deployment Control 2

Additional Fault Symptom:
 - Signal Cross-Coupled

Status: 
 - Malfunction Indicator Lamp is On for this DTC
 - Test not complete

Module: Restraint Control Module

===END RCM DTC B1408:2B-D0===

===RCM DTC B140A:13-A7===
Code: B140A - Second Row Driver Side Airbag Deployment Control

Additional Fault Symptom:
 - Circuit Open

Status: 
 - DTC Present at Time of Request
 - Malfunction Indicator Lamp is On for this DTC

Module: Restraint Control Module

===END RCM DTC B140A:13-A7===

===RCM DTC B140B:13-A7===
Code: B140B - Second Row Passenger Side Airbag Deployment Control

Additional Fault Symptom:
 - Circuit Open

Status: 
 - DTC Present at Time of Request
 - Malfunction Indicator Lamp is On for this DTC

Module: Restraint Control Module

===END RCM DTC B140B:13-A7===

===RCM DTC B140C:13-AF===
Code: B140C - Second Row Driver Side Seatbelt Sensor

Additional Fault Symptom:
 - Circuit Open

Status: 
 - DTC Present at Time of Request
 - Malfunction Indicator Lamp is On for this DTC

Module: Restraint Control Module

 Freeze Frame :
-GLOBTIM: 34842356 s - Global real time
-TOTDIST: 22662.0 km - Total Distance
-GLOBTIM: 34842356 s - Global real time
-TOTDIST: 22662.0 km - Total Distance
===END RCM DTC B140C:13-AF===

===RCM DTC B1414:13-AF===
Code: B1414 - Driver Side Restraints Sensor 2

Additional Fault Symptom:
 - Circuit Open

Status: 
 - DTC Present at Time of Request
 - Malfunction Indicator Lamp is On for this DTC

Module: Restraint Control Module

 Freeze Frame :
-GLOBTIM: 34842351 s - Global real time
-TOTDIST: 22662.0 km - Total Distance
-GLOBTIM: 34842351 s - Global real time
-TOTDIST: 22662.0 km - Total Distance
===END RCM DTC B1414:13-AF===

===RCM DTC U0154:00-AF===
Code: U0154 - Lost Communication with Restraints Occupant Classification System Module A

Status: 
 - DTC Present at Time of Request
 - Malfunction Indicator Lamp is On for this DTC

Module: Restraint Control Module

 Freeze Frame :
-GLOBTIM: 34842353 s - Global real time
-TOTDIST: 22662.0 km - Total Distance
-GLOBTIM: 34842353 s - Global real time
-TOTDIST: 22662.0 km - Total Distance
===END RCM DTC U0154:00-AF===

===HVAC DTC U0401:00-0A===
Code: U0401 - Invalid Data Received from  ECM/PCM A

Status: 
 - DTC Present at Time of Request
 - Malfunction Indicator Lamp is Off for this DTC

Module: Heating Ventilation Air Conditioning

===END HVAC DTC U0401:00-0A===

===GSM DTC None===
Successful DTC reading, no error codes found

Module: Gear Shift Module

===END GSM DTC None===

===PSCM DTC U3000:49-8A===
Code: U3000 - Control Module

Additional Fault Symptom:
 - Internal Electronic Failure

Status: 
 - DTC Present at Time of Request
 - Malfunction Indicator Lamp is On for this DTC

Module: Power Steering Control Module

===END PSCM DTC U3000:49-8A===

===PSCM DTC U3000:66-8A===
Code: U3000 - Control Module

Additional Fault Symptom:
 - Signal Has Too Many Transitions/Events

Status: 
 - DTC Present at Time of Request
 - Malfunction Indicator Lamp is On for this DTC

Module: Power Steering Control Module

===END PSCM DTC U3000:66-8A===

===ACM DTC B1A01:13-0B===
Code: B1A01 - Speaker #1

Additional Fault Symptom:
 - Circuit Open

Status: 
 - DTC Present at Time of Request
 - Malfunction Indicator Lamp is Off for this DTC

Module: Audio Control Module

===END ACM DTC B1A01:13-0B===

===ACM DTC B1A04:13-0B===
Code: B1A04 - Speaker #4

Additional Fault Symptom:
 - Circuit Open

Status: 
 - DTC Present at Time of Request
 - Malfunction Indicator Lamp is Off for this DTC

Module: Audio Control Module

===END ACM DTC B1A04:13-0B===

===SCCM DTC None===
Successful DTC reading, no error codes found

Module: Steering Column Control Module

===END SCCM DTC None===

===IPC DTC U0424:00-8A===
Code: U0424 - Invalid Data Received From  HVAC Control Module

Status: 
 - DTC Present at Time of Request
 - Malfunction Indicator Lamp is On for this DTC

Module: Instrument Panel Control Module

===END IPC DTC U0424:00-8A===

===GWM DTC None===
Successful DTC reading, no error codes found

Module: Gateway Module A

===END GWM DTC None===

===IPMA DTC U0401:86-AF===
Code: U0401 - Invalid Data Received from  ECM/PCM A

Additional Fault Symptom:
 - Signal Invalid

Status: 
 - DTC Present at Time of Request
 - Malfunction Indicator Lamp is On for this DTC

Module: Image Processing Module A

===END IPMA DTC U0401:86-AF===

===IPMA DTC U0452:86-AF===
Code: U0452 - Invalid Data Received From Restraints Control Module

Additional Fault Symptom:
 - Signal Invalid

Status: 
 - DTC Present at Time of Request
 - Malfunction Indicator Lamp is On for this DTC

Module: Image Processing Module A

===END IPMA DTC U0452:86-AF===

(OK) [17:37:53.811] PSCM Module firmware update has been started
(WARN) [17:37:53.821] Reading vehicle info...
(WARN) [17:38:05.097] Downloading firmware files from the Internet...
(ERR) [17:38:10.230] Downloading LX6C-14D007-DBC: File not found
(OK) [17:38:23.494] Service procedure completed successfully.



Are you still under warrenty? You could be voiding it by messing with this. Based on your pics there is nothing to upgrade.

1 Like

I bought it from auction, it has a side accident
not under warranty

First things first, you need to clear all of the DTC codes present for the RCM and PWM, since these still show the collision event data. This was not cleared after the accident and repair, and some of these codes will prevent the proper operation of the vehicle, especially the safety systems like air bags, etc.

Here is the file:
PSCM Module
LX6C-14D007-DBC.zip (16.0 KB)

1 Like

Thanks for your reply

already removed the RCM for crash event removing

ill try to reflash the PSCM and get back to you

Just so you are aware: You will need to replace the RCM in the vehicle for the safety systems to function.

1 Like

Can you share the latest beta forscan with me, please…im using 2.4.5 beta 3

FORScan Software Version 2.4.x Releases and Information - Ford / Information - CyanLabs Official Community

See your messages.

1 Like

you’re the best>>>Thanks for you help

Hi,
I managed to flash it with your file. however, the issue is still there (steering assist fault service required )
U3000:66-8A & U3000:49-8A codes are there in PSCM

(OK) [12:11:16.408] PSCM Module firmware update has been started
(WARN) [12:11:16.419] Reading vehicle info...
(WARN) [12:11:37.335] Total size: 869.8 Kb. Estimated duration: 2m - 3m
(WARN) [12:11:49.278] Loading SBL to primary module...
(WARN) [12:11:49.942] Loading block 1/1...
(OK) [12:11:50.205] SBL loaded successfully
(WARN) [12:11:54.735] Loading firmware to ECU: Strategy LX6C-14D003-AH
(WARN) [12:11:54.750] Erasing block 1/4...
(WARN) [12:11:58.620] Erasing block 2/4...
(WARN) [12:11:58.647] Erasing block 3/4...
(WARN) [12:11:59.878] Erasing block 4/4...
(WARN) [12:12:00.317] Loading block 1/4...
(WARN) [12:13:01.706] Loading block 2/4...
(WARN) [12:13:09.218] Loading block 3/4...
(WARN) [12:13:36.555] Loading block 4/4...
(OK) [12:13:38.190] Firmware loaded successfully
(WARN) [12:13:38.222] Loading firmware to ECU: ECU Configuration/Base Configuration LX6C-14D007-DBC
(WARN) [12:13:38.234] Erasing block 1/1...
(WARN) [12:13:38.674] Loading block 1/1...
(OK) [12:13:40.163] Firmware loaded successfully
(OK) [12:13:40.479] Service procedure completed successfully.

is it possible that PSCM is not working because RCM has a crash event?

is PSCM changeable in my vehicle or I need to buy a complete power steering from the scrap yard?

These codes are usually seen together as a result of the steering rack and internal rack motor failure. Usually this is not repairable, you must install a replacement steering rack. This is probably a result of the accident. In rare cases, the wiring to the steering rack could be faulty, and since the vehicle was injured, you should probably look at this as well.

rack motor failure is a common issue in new bronco and escape and it’s located inside the steering column assembly.

I visited a local scrap yard, he has 6 bronco sport and he already sold 6 steering columns assembly

since most people have similar issues after an accident, and the affected part is the motor (attached photo)

This topic was automatically closed 7 days after the last reply. New replies are no longer allowed.