Enabling Park Assist in Sync 3 (For those that have done a Sync 2 > Sync 3 Upgrade)

[F150Chief]

@Vchat20

7D0-02-02 xxxx-Bxxx-xxxx (This was the key bit. It was set to 1 for CGEA 1.3. Apparently C1MCA makes this work for some reason!)

C-Max is C1CMA platform.

@Vchat20

7D0-04-02 xx03-xx (I had this set up for 08 at one point. Didn’t seem to affect the park assist feature. Not sure what significant functional differences are between these)

PDC Architecture is the format used in the vehicle platform.
PDC is the functional system and setup.

@Vchat20

2013 vehicle and SHOULD be officially CGEA 1.2 with a Sync 3 retrofit

No, although the settings in the APIM are there. The vehicle systems are still C1, but the settings in the Sync 3 APIM which is CGEA, allow for the APIM to speak C1. The network messaging is translated to accommodate.