Here is your instructions for changing the theme on your Lincoln Navigator.
- Connect to the vehicle with FORScan. Make sure the ignition is on. The engine does not have to be running.
- You may be asked to identify the vehicle model year. Select from the menu presented.
- Save the profile. FORScan will automatically name the profile.
- You will see DTC’s, most likely. It is normal that there are DTC’s when connecting to the vehicle. Make it a habit to clear the DTC’s whenever you connect and before you make any changes to the vehicle asbuilt settings.
- To clear the DTC’s, select the DTC button to the left. The DTC’s will be listed and selecting one will give you the details about it. It is common to have communication DTC’s.
- At the bottom of the column you will see 2 buttons which are to read and clear DTC’s. Select the 'Clear DTC’s" button, follow the on screen instructions.
- Once that is done, you can continue to the “Asbuilt Configuration” button to the left. It looks like a computer chip.
- You will see the module configuration menus listed. Select the APIM Configuration and then select the ‘Play’ button at the bottom of the page. This will enter the APIM Asbuilt Configuration (Easy Mode). It will look like a listing of features, like the pic below. (Ignore the blue highlighted entry in the pic.)
- Scroll down to the “Visual Design Variants” entry and select it. At the bottom of the page, select “Edit Selected”.
- You will now see a listing of options for this entry. (This is basically how all the options are configured.)
- You will want to select the 10" Landscape option.
- Select the checkmark. The box will close at this point.
- At the bottom of the page, select “Write”. This will write the option change to the asbuilt and reboot the APIM. The unit should now come up full screen once rebooted.
- Disconnect from the vehicle when you are finished. Use the disconnect button on the General tab at the top. Always disconnect properly to avoid DTC’s.
That’s all for this one. You can look thru the options and if you have questions just ask.
