MEM_ERR03 going from 3.3.19052 to 3.4.20196

avdonr · 8 October 2020 19:43

That error means that there is a mistake in the AutoInstall.lst file. Specifically the Open#= line. Can you post your AutoInstall.lst file?

F150Chief · 8 October 2020 19:53

If you have the autoinstall from above…

Then that is fine.

Yes

bigblueshock · 8 October 2020 20:42

Here’s the log for the standalone gracenote failure:
CYANLABS - SYN3 UPDATER - V1.0.1.1
Operating System: Microsoft Windows 10 Pro (2004)

PREVIOUS CONFIGURATION
Version: 3.4.20196
Region: NA
Navigation: False
Mode: autoinstall

USB DETAILS
Model: Patriot Memory USB Device (Size: 118GB)
FileSystem: exFAT
Partition Type: MBR

AUTOINSTALL.LST
; CyanLabs Syn3Updater - Autoinstall Mode - Sync 3.4.20196 NA

[SYNCGen3.0_ALL_PRODUCT]
Options = AutoInstall
[SYNCGen3.0_ALL]
Item1 = GRACENOTES - 4U5T-14G423-CA_123766.tar.gz
Open1 = SyncMyRide\4U5T-14G423-CA_123766.tar.gz
Options = Delay,Include,Transaction

SYNCMYRIDE FILES (1)
4U5T-14G423-CA_123766.tar.gz (724.2MB)

LOG
INFO: Starting process (Sync 3.4.20196 - NA - Non Nav APIM)
INFO: Verifying 4U5T-14G423-CA_123766.tar.gz
INFO: Successfully Verified 4U5T-14G423-CA_123766.tar.gz
INFO: All downloads completed!
INFO: Re-creating partition table as MBR and formatting as ExFat on selected USB drive
INFO: Creating autoinstall autoinstall.lst
INFO: Copying 4U5T-14G423-CA_123766.tar.gz
INFO: Verifying 4U5T-14G423-CA_123766.tar.gz
INFO: Successfully Verified 4U5T-14G423-CA_123766.tar.gz
INFO: PROCESS COMPLETE!

Here’s the Autoinstall.lst the updater created:

; CyanLabs Syn3Updater - Autoinstall Mode - Sync 3.4.20196 NA

[SYNCGen3.0_ALL_PRODUCT]
Options = AutoInstall
[SYNCGen3.0_ALL]
Item1 = GRACENOTES - 4U5T-14G423-CA_123766.tar.gz
Open1 = SyncMyRide\4U5T-14G423-CA_123766.tar.gz
Options = Delay,Include,Transaction

I see AutoInstall isn’t even in the options. Will just add that. Will see what happens. This is what I will use

[SYNCGen3.0_ALL]
Item1 = 4U5T-14G423-CA_123766.tar.gz
Open1 = SyncMyRide\4U5T-14G423-CA_123766.tar.gz
Options = Delay,AutoInstall

F150Chief · 8 October 2020 20:57

This is what you need…

The autoinstall.lst isn’t formatted right in the log.

ferrcad · 8 October 2020 21:10

F150Chief,

Quick Question, I had the old Sync MFT in my Mustang that I upgrade with a 2018 Sync 3 with Nav APIM then did a full upgrade via Cyanlabs to 20136 then just recently did the upgrade to 20196. My forscan line 7D0-02-03 has all 0000 from the original programming change over ASBuilt Data. Should that second octave be 4 since I live in the US . I have HD Radio and Sirius. Please let me know your thoughts!! Will that allow the album and radio logos to start working? Thanks

bigblueshock · 8 October 2020 21:18

All set.

Thanks guys!

F150Chief · 8 October 2020 21:53

Most excellent, dude…

F150Chief · 8 October 2020 21:57

You can just leave that as is because there are no radio logos in the US other than SiriusXM and HD FM radio.

ferrcad · 8 October 2020 22:05

Did not do the firmware upgrade as stated on:

But did change the letter to C and was able to get the Calm screen to work…

I do have HD Radio, will the logos work on C or 0?

F150Chief · 8 October 2020 22:12

Use 4. You don’t have a traffic modem…
4=TPEG Not Available, CS Available, ED Off, AACF Available

HD radio does not rely on this setting. You don’t need to do a firmware upgrade if you have calm screen working. There is nothing to gain past that on a US car.

ferrcad · 8 October 2020 22:35

I set it at 4. Still no option under Radio Settings for Radio Logo. Still have Calm Screen available. So your saying I’ll never see Radio Station as an option under radio settings?

Can you explain what these codes mean? TPEG, CS, ED, ACCF.

I assume CS = Calm Screen?

avdonr · 9 October 2020 00:10

Radio logos aren’t a thing in NA. Mostly used for Europe DAB. The most you’ll be able to enable (which you have) is calm screen.

ferrcad · 9 October 2020 00:25

Thanks for information…

F150Chief · 9 October 2020 00:38

TPEG traffic modem, EU and not NA
CS is calm screen
ED is Enhanced DAB (Digital Audio Broadcast) EU not NA
AACF is still unknown what the acronym is, but it’s enabled on most vehicles.

Thanks, avdonr, for the answer there…

ferrcad · 9 October 2020 01:05

Thanks to all, have it set at 0400 and I’ll leave that way for now.

Thanks again!

CyanLabs · 9 October 2020 16:24

Added as a bug, i see what happened here

flc85 · 22 October 2020 13:58

Hello,
same problem here with LST_ERR07 I have changed the autoinstall.lst

        CyanLabs Syn3Updater - Autoinstall Mode - Sync 3.4.20196 EU

        SYNCGen3.0_ALL_PRODUCT]
        Options = AutoInstall
        [SYNCGen3.0_ALL]
        Item1 = GRACENOTES - 4U5T-14G423-AB_1598633764000.TAR.GZ
        Open1 = SyncMyRide\4U5T-14G423-AB_1598633764000.TAR.GZ
        Options = Delay,Include,Transaction

to:

 CyanLabs Syn3Updater - Autoinstall Mode - Sync 3.4.20196 EU

    [SYNCGen3.0_ALL_PRODUCT]
    Options = AutoInstall
    [SYNCGen3.0_ALL]
    Item1 = 4U5T-14G423-AB_1598633764000.TAR.GZ
    Open1 = SyncMyRide\4U5T-14G423-AB_1598633764000.TAR.GZ
    Options = Delay,AutoInstall

without success

CYANLABS - SYN3 UPDATER - V1.0.1.1
Operating System: Microsoft Windows 10 Pro (1903)

PREVIOUS CONFIGURATION
Version: 3.4.20196
Region: EU
Navigation: True
Mode: autoinstall

USB DETAILS
Model: USB Disk 2.0 USB Device (Size: 0B)
FileSystem: exFAT
Partition Type: MBR

AUTOINSTALL.LST
; CyanLabs Syn3Updater - Autoinstall Mode - Sync 3.4.20196 EU

[SYNCGen3.0_ALL_PRODUCT]
Options = AutoInstall
[SYNCGen3.0_ALL]
Item1 = GRACENOTES - 4U5T-14G423-AB_1598633764000.TAR.GZ
Open1 = SyncMyRide\4U5T-14G423-AB_1598633764000.TAR.GZ
Options = Delay,Include,Transaction

SYNCMYRIDE FILES (1)
4U5T-14G423-AB_1598633764000.TAR.GZ (684,9MB)

LOG
INFO: Starting process (Sync 3.4.20196 - EU - Keep Existing Maps)
INFO: Verifying 4U5T-14G423-AB_1598633764000.TAR.GZ
INFO: Successfully Verified 4U5T-14G423-AB_1598633764000.TAR.GZ
INFO: All downloads completed!
INFO: Re-creating partition table as MBR and formatting as ExFat on 
selected USB drive
INFO: Creating autoinstall autoinstall.lst
INFO: Copying 4U5T-14G423-AB_1598633764000.TAR.GZ
INFO: Verifying 4U5T-14G423-AB_1598633764000.TAR.GZ
INFO: Successfully Verified 4U5T-14G423-AB_1598633764000.TAR.GZ
INFO: PROCESS COMPLETE!

CyanLabs · 22 October 2020 16:26

This is a known issue, will be fixed in the upcoming version.

for now please use this below contents

; CyanLabs Syn3Updater - Autoinstall Mode - Sync 3.4.20196 EU

[SYNCGen3.0_ALL_PRODUCT]
Item1 = GRACENOTES - 4U5T-14G423-AB_1598633764000.TAR.GZ
Open1 = SyncMyRide\4U5T-14G423-AB_1598633764000.TAR.GZ
Options = Delay,Include,Transaction

it’s at the top of my todo

flc85 · 22 October 2020 16:57

Works fine, thank for your all great jobs