My20, wrong USB...

Ford SYNC 3 Support CyanLabs Update Support
, , , , ,
1

Ok, I am stupid. I was updating my none My20 (format) F150 but accidently ran it on my 2020 Edge with My20. I fear its toast. I do see the APIM in Forscan have tried to update firmware with success. It’s still black. In reading I understand that my format may not have really formated and its a screen driver. I do have a 2019 screen here. Am I toast? Any help would be appreceated.

SYNC Region: NA

Navigation Variant: Nav

Manufacturer Year: MY20

Install Type: OEM

Old SYNC Version: 3.3.19052

New SYNC Version: 3.4.23118

Do you have a error message, if so what is it?
Black screen

Update Method: CyanLabs Syn3 Updater

Syn3 Updater Version: 2.13.3.0

Syn3 Updater Documentation Read: yes

Syn3 Updater Log File

None
2

The problem is the video. You can try a recovery option @NaviUpgrade or using Fmods.

3

Do you mean Reformat?

It is, like 99%…

Bricked APIMs that were reformatted are seen through forscan, yes… but they do not exhibit signs of life, like radio/music playing, powered USB ports, phone pairing or back up camera while reversing (if equipped with). Is that your case?.

You have not provided a log, so I do not know… 99% it’s dead, but share the log to confirm that… (i’m not sure why you didn’t)

4

Yes, reformatted. Argee, most like 100%. yes, on Forscan. no logs due to my initial introduction.