Not creating interrogator file via Syn3 Updater

Do I have to wait for the system to reboot before removing USB after “Installation complete”.

Steps I did
1.) Used a new USB (2gb) drive
2.) Prepared USB Drive via Syn3 (current stable version)
3.) Inserted USB into USB port of truck
4.) Turned on ignition
5.) Received message “Installation Complete”
6.) Removed USB, turned off truck
7.) Plugged into Laptop to interrogate and looked for .xml file and none was on drive.
8.) Tried a few times

Please post using the Sync 3 Issue template Issue with Sync 3


In the SyncMyRide folder?

Not there either.
I posted another using the Template.

The logs do not show the attempts to make an USB interrogate drive.

Sorry for the double post.

Continued here → Not creating interrogator .xml file