For each new release a specific thread will be created, please use this thread to post any feedback or issues you have noticed for the corresponding release. You can update using Syn3 Updater [image] It’s also added to the manual method on cyanlabs.net I have added the updated Voice package fou…

3.4.21098 now released, thread locked. [image] Sync 3.4.21098 - Feedback & Issues SYNC 3 Support For each new release a specific thread will be created, please use this thread to post any feedback or issues you have noticed for the corresponding release. You can update u…

When I do the master reset after installing this version with the 2.20 maps, will that get rid of all of my ForScan changes I have made to my vehicle?

No, on the contrary it should properly configure the SYNC system to reflect your changes.

Some cars were never supposed to have climate controls on the Sync screen, the older version of 3.4 added this feature by mistake and later versions removed it again, but to answer your question, yes climate settings on the Sync screen can be added using Forscan in the APIM easy settings menu. I can…

Hi, hat alles einwandfrei geklappt…selbst mein Begrüßungslogo und Klimabutton sind noch vorhanden!!! :grin: :hugs: Ford Puma 2020 EU F10 CYANLABS - SYN3 UPDATER - V2.5.7.0 Branch: Beta Operating System: Microsoft Windows 10 Pro (2009) PREVIOUS CONFIGURATION Version: 3,4,21020 Region: EU Nav…

Downgraded and upgraded again to F10 maps and 21020. DSP doesn’t sound as good in the driver’s seat as it did but that could be me. Ten minutes before logos came up to indicate files were installing then 48 minutes. Radio switched on a minute later and then did the master reset. All seems to be Ok…

Did the update today (2017 Focus ST), only the APPS package, coming from 3.4.20351. No issues, all good, however I only briefly tested.

I just did the installation on a 2016 Lincoln Mkx and this version feels much smoother, I did not delete any settings enabled with ForScan. After installation it is recommended to do a Master Reset so that everything starts from the factory … They should enable it to be used with Android Auto Wirele…

Just performed the downgrade to get the new maps and new version… All went smooth and took about 25 minutes coming from 3.4.20351. Performed master reset as instructed. Currently have no Sirius logos but i assume those will come back in time as I havent had an issue with those before

Upgraded to 3.4.21020 from 3.4.20351 along with new maps, took about 40mins for me with terminal issues, initially Sat Nav wasn’t available but a master reset sorted that. Nav and Sync in general appear more responsive, can’t be too many of these upgrades left as Ford is moving to Sync4 and then tea…