If you run reformat on a MY20 (2020) the APIM might brick. There is a warning on the Syn3 app.
1 Like
As he came from 3.0 there was no way he had my20 so i never asked that question 
1 Like
OK I have some doubts because I have sync 3.4 20134, and I prepare update on pen-drive I choose version 3.4 20196 and now I have reformat and downgrade to 3.0. That is correct, first should be downgrade and after that reformat and installation?
autoinstall inside:
; CyanLabs Syn3Updater - downgrade Mode - Sync 3.4.20196 EU
[SYNCGen3.0_ALL_PRODUCT]
Item1 = TOOL - GB5T-14G386-SC_85041.tar.gz
Open1 = SyncMyRide\GB5T-14G386-SC_85041.tar.gz
Item2 = APP - 4U5T-14G381-AN_1552583626000.TAR.GZ
Open2 = SyncMyRide\4U5T-14G381-AN_1552583626000.TAR.GZ
Options = AutoInstall
[SYNCGen3.0_ALL]
Item1 = REFORMAT TOOL - 1u5t-14g386-cb.tar.gz
Open1 = SyncMyRide\1u5t-14g386-cb.tar.gz
Options = AutoInstall,Include,Transaction
It is OK?
Item 1 and 2 of the first section is remove gracenotes, downgrade to 3.3.19052, then it will reboot and run the reformat tool to upgrade to 20196 and install new maps.
OK now it’s clear. Thanks
while updating maps with downgrade i got the pkg_err3 error and the update stopped. The Sync screen was all red. I re-downloaded the corrupt file but the error remained. How to proceed? If I remove the usb drive, the Sync3 does not turn off and is waiting for the usb drive. Thank you
Post your log file from your usb
Hi, now it’s ok … the problem was the brand new usb pendrive that didn’t work … I updated all sync3 software (apps, gracenote, voices, maps) to the latest EU version, but now I don’t see the gracenote version number in the info screen. I haven’t done a factory reset.
…
do one then…?
yes, I’ll do … also because after the installation I received the error SIGN_ERR02.
That error means the hash value for a package didn’t match what it was expecting. Probably a corrupt file. Try downloading/installing again.
Technically it means the signature didn’t match the files but yes the same problem is likely the reason, redownload the file.
1 Like
Hi, i like to update mein EU Fiesta St with Sync 3.4.19200 with F8 map. But if i follow the giude the syncmanager gives me the warning about MY or production time in 2020. Now i´m not sure about my car, beacuse production was 12/19 so it will be MY20 but production not 2020. How i can check if i can update or not?
PM me your VIN as we can check, it will likely be MY18.5+ my early 19 fiesta ST isn’t my20
Thanks, again. Everything goes fine and I have latest version sync 3.4 and maps F9 (09.2020).
Looking forward new updates and modifications 
1 Like
OK, thank you. Then i have to wait.
I’m finally ready to upgrade from Version 3.0 to 3.4, however, I think it might be best to wait for the next ANZ map release before doing so. Would you please advise if you know when the ANZ 1 20 map is due to be released? Thank you.2020-11-01T13:00:00Z
It would be released whenever ford decides to release it, no idea on an ETA