Ford Escape from the USA imported to Poland which region to choose in the marked place?
Please read this excellent tutorial from pagrabinis:
https://community.cyanlabs.net/t/tutorial-eu-maps-to-us-car-3-4-sync-f9-maps/1663/17
But I have a converted APIM and I have 64GB of memory.
CyanLabs does not support changing region, if you have done the required stuff already simply “pretend” you have a EU APIM and follow as if you did have a EU APIM
1 Like
fidodido
Since it is a US car imported to Poland we would not know that. Please follow CyanLab’s response.
I did so too. I had 3.4_19101 F8 and uploaded 3.4_20196 F9. But I don’t know why I don’t have the option to enable the station logo and calm screen in the radio settings.
Go to the Tutorial section and run the APIM Utility. It will show you all of your storage, firmware, software, etc. It could be you need a firmware update, or simply you APIM asbuilt settings are improper for those functions.
I have such a file generated. But all I can read from it is how much memory there is.
Hello, I updated to version 20136 and I cannot update it to 20196, I don’t know if the pendrive says updating and it stays that way, I left it for 20 minutes and nothing, how long does this procedure take? Thank you
You should see about 58GB formatted total and a certain value free. Near the top of the file, you will see your asbuilt info, beginning with DE0 and continuing. Near the center down you will see values for your installed OS (GUI) and firmware vales.
If you used the SYN3 Updater, please post the log file that is on the USB root.
inserted the pendrive and it says updating and I was up to 20 minutes, how long does it take for the first poster to appear when it restarts?
Moderator Notice - Removed inline code, please attach files to keep forum clean
These are my files.
-
Log
log.txt (9.8 KB) -
XML
logging.xml (10.1 KB)
I have a ford kuga diesel from the year 2020, with software version: 3.4. version 20136, map version F8.
Can I use syn3 updater? and if I can use it should I use version 20136 or can I use version 20196?
Thx in advance
Use whatever version you want to.
1 Like
I downloaded version 20196 and when I installed it in the car I got the message that the first part was installed correctly and that I had to restart the car (I stopped the engine, got out of the car and closed the door, then I opened the door , I started the car, I inserted the pendrive) but the screen has gone completely black and I no longer get a response.
What have I done wrong? how can i reset sync3.4?
Thx.
Post your log from the USB.
Also, did you try to update maps?
Hi everyone, just tried to update my ford sync 3 for my ecosport 2018 model
at first, I was getting the error 45UT-14G423-AA_123694.tar.gz after reading about this error I tried again after deleting the gracenotes but now ERROR UPDATE PACKAGES NOT FOUND…
please help
and also can you please let me know what region should I use for India ROW?
thanks