For each new release i will create a special thread, please use this thread to post any feedback or issues you have noticed for the corresponding release. ANY COMMENT POSTED NOT DIRECTING RELATING TO FEEDBACK AND/OR ISSUES FOR SYNC 3.4.20136 WILL BE SPLIT TO A SEPERATE TOPIC! PLEASE CREATE A NEW TH…

Thread closed due to being superseded by newer versions, if you have an issue that isn’t a known issue mentioned in this thread already please create a separate topic.

Please help my screen is stuck not getting updated and cannot go back tried to start over again but getting msg USB not recognize, also tried removing the battery terminal but still the same [WeChat Image_20201011153611]

You need to remove the entry in your reformat.lst for the file you removed

[image] Zarapito_Zarapitez: I have a ford kuga diesel from the year 2020, with software version: 3.4. version 20136, map version F8. Can I use syn3 updater? and if I can use it should I use version 20136 or can I use version 20196? Thx in advance [image] CyanLabs: Use whatever version y…

[image] SaNdMaN: Post your log from the USB. Also, did you try to update maps He borrado el registro del usb, e intenté actualizar los mapas de la versión F8 a la F9, y he obtenido la “pantalla negra” a los 15 minutos de actualización. Ahora no sé cuál es el siguiente paso que debo dar. Un …

From what others have experienced recently it appears the only fix is to go to Ford and get them to replace the unit.

There’s no current fix. As stated by multiple warnings in the app there are issues with the type of installation you performed on your MY20 unit. So until someone discovers a solution, only solution is to go to the dealer and say that your SYNC died… Of course, do not mention any of your actions …

Just to further this comment, the app does work with 2020 cars HOWEVER it does not work it reformat mode so MAKE SURE 100% THAT YOU HAVE PUT THE CORRECT “CURRENT VERSION” INFORMATION IN!!

Greetings to all. On my Ford S-Max m.y. 2019 I had from the production of SYNC: 3.3 version 19052. This year I manually updated to 3.4 version 19101 according to the instructions on this website. At the beginning of the month, there was an official release from Ford for the version: 20136. Since …

[image] RSWRC: At the beginning of the month, there was an official release from Ford for the version: 20136. Since then, I have problems with the radio when it is turned off, as members write here. I have a quiet screen in the system, but I can’t see the LOGO radio. Can I use a package with a …