You mean the North America manual installation? I did it yesterday, no issues.
Yes. Did you installed both? or just the Apps?
Both. Made this…I always use the Interrogator utility to show storage and health of the APIM when I do updates. You can just delete it if desired. (#3)
[SYNCGen3.0_3.4.20196_PRODUCT]
Item1 = 5U5T-14G381-EG_1598634070000.TAR.GZ
Open1 = SyncMyRide\5U5T-14G381-EG_1598634070000.TAR.GZ
Item2 = 5U5T-14G391-CM_1598635923000.TAR.GZ
Open2 = SyncMyRide\5U5T-14G391-CM_1598635923000.TAR.GZ
Item3 = GB5T-14G386-AC_1587495565000.TAR.GZ
Open3 = SyncMyRide\GB5T-14G386-AC_1587495565000.TAR.GZ
Options = Delay,AutoInstall
1 Like
THNX!.. Will use that.
I have a 2018 F150 that I updated from 3.0 TO 3.4. I am unable to perform a Master Rest as the settings/General Settings icon is “Gray’d” out. Also the massage seats ICON does not allow any function.
How can I perform a Master Reset to see if these reset?
That’s odd. Just for good measure, was the engine running when you took that photo?.
If not, try it with the engine running; or viceversa. Also, I’d cycle Sync by turning the engine off and opening your door. Then try again.
Also, let’s see if anyone know a physical way to perform a master reset.
Disconnect the battery for 15 minutes…the Sync unit is not shutting down completely for a reboot. This should reset the unit.
If you have a code scanner or FORScan, take a look for DTC codes if you can…
My general option is usually greyed out when I have my phone connected. Make sure you don’t have anything plugged in.
Did someone found a fix for front camera ? Or downgrade is needed ?
multiple people in the discord community say their front camera works
good afternoon.
the usb issues of release 20136 are fixed in this new release?
Thanks in advance
Good day.
I am new here and just got my focus mk4 updated from Sync 3.3 to 3.4.20196
However I found two issues from my end :
1. Navigation is out of work
->I guess it’s related to the wrong map version because the map looks like for China only, not for Taiwan (Yes, I come from Taiwan)
2. Cannot get into “Bezel Diagnostics” after updated to Sync 3.4
Originally it works in Sync 3.3 following the step : Hold Skip Track on the stereo and Skip Track on the steering wheel for around 10 seconds.
Is it possible to fix the Navigation issue or does someone know where to download Taiwan Navigation map and install in my Focus MK4?
Really appreciate your help.
Hi there,
If you could provide me with the VIN number of your vehicle and a link to the Ford website that provides your country with maps, I will look to see if the correct maps are available. Please private message your VIN to me if you are happy.
On the second point, please carry out a master reset and see it works.
Thanks a lot. Your idea is workable!!!
I downloaded the maps (remark, maps for Sync 3.3) from Taiwan Ford website and installed in Sync 3.4.
Then rooting the system twice and the navigation is back 
Moreover Bezel Diagnostics is available as well.
Excellent news - is there any chance you can send me the website address for the maps?
I have updated to 20196. How do I only update MAP without reformatting?
New user here… Successfully updated a 2019 Lincoln MKT (USA) from 3.0 to 3.4.20196. Noticing a couple small issues:
- SiriusXM the album art isn’t displayed however I have channel logos on the screen. Gracenotes says it’s installed and running 1.1.1.1332 (NA-0010)
- When browsing the menu, the tiles are skewed to the right a small amount overlapping into the next page. Is this normal?
Thanks!
There isn’t currently a way to do this as part of the app, you can use this autoinstall file autoinstall.lst (1.2 KB)
Download all of these
Map
https://ivsubinaries.azureedge.net/swparts/1U5T-14G421-BAG_1591726015000.TAR.GZ
https://ivsubinaries.azureedge.net/swparts/1U5T-14G421-BBG_1591726765000.TAR.GZ
https://ivsubinaries.azureedge.net/swparts/1U5T-14G421-BCG_1591726913000.TAR.GZ
https://ivsubinaries.azureedge.net/swparts/1U5T-14G421-BDG_1591727234000.TAR.GZ
https://ivsubinaries.azureedge.net/swparts/1U5T-14G421-BEG_1591727457000.TAR.GZ
https://ivsubinaries.azureedge.net/swparts/1U5T-14G421-BFG_1591727753000.TAR.GZ
https://ivsubinaries.azureedge.net/swparts/1U5T-14G421-BGG_1591728190000.TAR.GZ
https://ivsubinaries.azureedge.net/swparts/1U5T-14G421-BHG_1591728542000.TAR.GZ
https://ivsubinaries.azureedge.net/swparts/1U5T-14G421-BJG_1591729086000.TAR.GZ
Voice
http://ivsubinaries.azureedge.net/swparts/4U5T-14G422-BAE_1580861780000.TAR.GZ
http://ivsubinaries.azureedge.net/swparts/4U5T-14G422-BBE_1580861854000.TAR.GZ
http://ivsubinaries.azureedge.net/swparts/4U5T-14G422-BCE_1580861916000.TAR.GZ
http://ivsubinaries.azureedge.net/swparts/4U5T-14G422-BDE_1580862152000.TAR.GZ
License
https://ivsubinaries.azureedge.net/swparts/1U5T-14G424-BJ_1591719092000.TAR.GZ
is this the last EU 09/2020 card? If so, the files look the same as when creating the key with reformatting? can i take back the same and just replace the autoinstall?
oh yeah that would work also 
1 Like