Sync 3.4.20282 - Feedback & Issues

which thread. I guess it will not possible

okay, which of this possibilities do u think I have to edit?
0 = USB2 Disabled, Navigation Disabled, Rear EFP Disabled
1 = USB2 Disabled, Navigation Disabled, Rear EFP Enabled
2 = USB2 Disabled, Navigation Enabled (Telenav Common HMI), Rear EFP Disabled
3 = USB2 Disabled, Navigation Enabled (Telenav Common HMI), Rear EFP Enabled
4 = USB2 Disabled, Navigation Enabled (NNG External HMI), Rear EFP Disabled
5 = USB2 Disabled, Navigation Enabled (NNG External HMI), Rear EFP Enabled
6 = Reserved
7 = Reserved
8 = USB2 Enabled, Navigation Disabled, Rear EFP Disabled
9 = USB2 Enabled, Navigation Disabled, Rear EFP Enabled
A = USB2 Enabled, Navigation Enabled (Telenav Common HMI), Rear EFP Disabled
B = USB2 Enabled, Navigation Enabled (Telenav Common HMI), Rear EFP Enabled
C = USB2 Enabled, Navigation Enabled (NNG External HMI), Rear EFP Disabled
D = USB2 Enabled, Navigation Enabled (NNG External HMI), Rear EFP Enabled

What means USB2?

What is your present value at that address using FORScan?

the present value it´s an A

Plz help!!!
Downloaded RoW version of 20282 and attempted updating 2019 EcoSport from 20136 to 20182…
No success even after an hour drive. Attempted master reset and again update…no change…just keeps saying updating software and no progress even after couple of hours drive.
Should I first jump to 20237? Or is it okay to jump directly to 20282.
One more question. Can I use NA version of update for a EcoSport in India??

1 Like

All apps are the same version worldwide, meaning 3.4.20282 is one file for everyone.

If you have a NON-NAV unit, please read this thread:

Syn3 Updater 2.0 BETA TEST!

Good afternoon and HAPPY HOLIDAYS!

Will I be able to upgrade on my Mondeo 18, with 282?

Thank you very much.

Have you loaded EU maps on the 2014 Explorer? Is it still Sync 2 or has it been converted to Sync 3? If it has been converted, can you provide info on what Sync version it is on?

Yes you should be able to do so.

1 Like

Looks like that is my problem, Below is the extract from xml:
ON-Line Diagnostic DB Reference Number: 5U5T-14G381-ED
ECU Core Assembly Number: H1BT-14G380-AB
ECU Delivery Assembly Number: JK2T-14G371-BCC
Vehicle Manufacturer ECU Software Number: GB5T-14G374-DG

<d2p1:PartitionHealth available=“54M” total=“1.7G” type="/fs/Nuance/"/>
<d2p1:PartitionHealth available=“1005M” total=“1.2G” type="/fs/rwdata/"/>
<d2p1:PartitionHealth available=“35M” total=“35M” type="/fs/rwdata/quip/"/>
<d2p1:PartitionHealth available=“90M” total=“90M” type="/fs/rwdata/quip/"/>
<d2p1:PartitionHealth available=“142M” total=“1.4G” type="/fs/mp/"/>
<d2p1:PartitionHealth available=“380K” total=“74M” type="/fs/mp/resources"/>
<d2p1:PartitionHealth available=“1.1G” total=“3.0G” type="/fs/images/"/>

Please tell me: just extract the folder for Pen and put it in the car?

yes, I have EU Maps F9 with version 20282 on Explorer. Upgraded from SYNC2 to SYNC3

Managed to clean up grace notes and install small voice files.
Still faced MEM_ERR03.
Had checked before attempting and I had 2.2G free.

F150chief

If I understand correctly, it has not yet been released for copying. Right?
Thanks.

This is a BETA version not yet released.

Run the APIM Utility and post what you see, please.

FYI, 20282 is now available on the official Ford owners site.

attempted again and same result while trying to move from 20136 to 20282 and 20237. Below is the extract from logs:
-<d2p1:AdditionalAttributes vmcuVersion=“Vector_VMCU_02.02.20” RAM=“361295872” logGeneratedDateTime=“2020-12-27T10:43:02+00:00”>
<d2p1:PartitionHealth available=“3.1M” total=“465M” type=“/fs/Nuance/”/>
<d2p1:PartitionHealth available=“1011M” total=“1.2G” type=“/fs/rwdata/”/>
<d2p1:PartitionHealth available=“35M” total=“35M” type=“/fs/rwdata/quip/”/>
<d2p1:PartitionHealth available=“90M” total=“90M” type=“/fs/rwdata/quip/”/>
<d2p1:PartitionHealth available=“142M” total=“1.4G” type=“/fs/mp/”/>
<d2p1:PartitionHealth available=“380K” total=“74M” type=“/fs/mp/resources”/>
<d2p1:PartitionHealth available=“2.3G” total=“3.0G” type=“/fs/images/”/>
Below is XML…masked Identification numbers alone with XXXXXX

Sync__.xml (10.2 KB)

Hi everyone, I’ve installed this compilation from 20136 with all files as my previous were on lower versions. One issue I’ve noticed is some latency (few seconds) in displaying an image cover of played album from the USB. I feel in general it’s laggier compared to 20136. What makes me happy is that I can browse the USB while driving.

F150chief, you don´t have an answer?