Yes, I know. I don’t blame syn3updater. A bit weird, that 10GB is not enough space. Before updating to F12 maps, I had 11G free space. I cannot do reformat (MY20), so there is probably no way to do a proper update.
Do 1 or 2 of the 4 files at a time…
I upgraded to 3.4.23088 on both my 2016 F150 and my wife’s 2019 Escape. I’m having to do frequent soft resets on both vehicles to recognize plugged in iPhones. Rarely if ever had to do this on previous builds. Anyone else?
1 Like
Did you do a master reset?
Obviously that will clear your phones and then you can try pairing them again.
Updated from 22251 to 23088 and 2.22 NA maps today. 2016 Edge. Master reset after install. Zero problems so far
@JacquesA try with this autoinstall options. This morning it worked for me. When possible I will check if the new files have been written. The problem is that isn’t possible to installa all 4 files in one single block (not enough space on APIM)
; SYNC3 Assembly Upgrade - Voice_Map F12 Release 3.2.23088_PRODUCT - Only for Nav/EU assemblies.
[SYNCGen3.0_3.4.23088_PRODUCT]
Item1 = 4U5T-14G422-BAK
Open1 = SyncMyRide\4U5T-14G422-BAK.tar.gz
Options = AutoInstall
[SYNCGen3.0_3.4.23088]
Item1 = 4U5T-14G422-BBK
Open1 = SyncMyRide\4U5T-14G422-BBK.tar.gz
Item2 = 4U5T-14G422-BCK
Open2 = SyncMyRide\4U5T-14G422-BCK.tar.gz
Options = Delay,Include,Transaction
[SYNCGen3.0_ALL]
Item1 = 4U5T-14G422-BDK
Open1 = SyncMyRide\4U5T-14G422-BDK.tar.gz
Options = Delay,Include,Transaction
Thx, will try! But this is all weird, that 10G freespace is not enough, when whole F12 map installation worked just fine :-/
Same for me
1 Like
This works! All new nav voice packages installed and log uploaded to ford, no new updates now.
perfect.
Hallelujah! The speak and spell bug is gone!
1 Like
Is anyone having troubles with gps signal with this version on retrofitted Sync3 systems? I mean we are using no oem gps antena.
I did some others retrofit and no oem antena works ok, maybe respone time is lower than oem, but it works. I am supposing that with this version 23088 gps signal is lost easily and we need to reset apim to get signal again, even changing the location of antenna do not help.
I am asking, not assuring that there is an error, because the version works ok in oem systems.
The trouble with no nav systems still present, maybe some relation with my problem. I will downgrade to 21194 and see what happen.
Car: Ford Ranger 2017 with sync2 upgraded to sync3.
Regards
This has always been a issue, use a genuine antenna for best performance, also note that there is antenna location configuration in asbuilt for the APIM
I have currently 3.4.22110 and F11.
Also have fmods.net like overclock, video and camera on demand installed mods.
In note says “Does JB works? YES” but, I am not sure, sorry if already asked 
If update to 3.4.23088 will it keep all my fmods installed or I should do maps update only (really do not want to install all mods from scratch again)?
2 Likes
Just FYI - Ford has consistently not done the autoinstalls for the NAV Voice files correctly, which ends up in the memory errors. I have outlined this in several tutorials and posts before. Splitting the installation into 2 separate instances usually solves the issue for both EU and NA file sets. If you have already installed the F12 package, you will not need to include the license.
Lots of aftermarket (cheap) antennas do not have the proper gain or bandwidth specifications, as they make them cheap for volume sales. These antennas to not have good noise thresholds and thus only pick up the stronger satellite signals (closer satellites) which results in poor location granularity. Buying a quality antenna usually solves these issues, even in city environments.
Any specific recommendations? I’m using the one that came with my retrofit kit…no real issues, but I think I’d like to be proactive…
Anyone pleae for Sync 3.4.23088 & F12 EU / 2.22 NA / 2.22 ANZ Maps - Feedback & Issues - #162 by petarmaletic?
Thanks
1 Like
Check with FMODS, its their software.
1 Like