Sync 3 upgrade from Sync 2 - Nav Stuck in Cologne or no GPS based on the asbuilt I use

[SaNdMaN]

Hello.

Post your complete as-built values for others to review.

Also, have you looked into these?:

@F150Chief

Region Programming

This installation requires that the APIM As Built configuration be changed to reflect the proper region for which the maps are being installed with FORScan or another appropriate program. FORScan can be downloaded at Download FORScan . Please see the FORScan site for instructions. It is best to perform these changes before the EU Map installation to avoid confusion during the remainder of the process.

The following changes will need to be performed to the APIM and ACM (optional) modules. ENH-DAB is not applicable to this installation unless the US ACM has been changed to accommodate the regional specifications and the appropriate APIM and ACM asbuilt configurations are performed. The country codes can be found at As-Built Database - CyanLabs , select the Region tab.

APIM Asbuilt Settings:

The country information in the APIM As Built needs to be changed:
from 7D0-02-01 5553 xxxx xxxx
to 7D0-02-01 XXXX xxxx xxxx
This setting changes the country from US to your country code.

The Navigation Map Type for NA and EU is Telenav. This should not have to be changed.

ACM Asbuilt Settings:

(The ACM settings are optional and do not affect the installation or operation of the maps.)
The Tuner Region information in the ACM needs to be changed:
from 727-04-01 x0xx xxxx xxxx
to 727-04-01 x3xx xxxx xxxx
Tuner Region: 0=North America, 1=GCC, 2=Japan, 3=Europe, 4=Asia Pacific.

SDARS Region should be set to unconfigured:
727-04-01 xxx0 xxxx xxxx
SDARS Region: 0=unconfigured, 1=U.S., 2=CANADA, 3=no content.

SDARS Data Services should be set to unconfigured:
727-04-01 xxxx x0xx xxxx
SDARS Data Services: 0=unconfigured, 1=Data Services, 2=no Data Services.

The country information ACM As Built needs to be changed:
from 727-04-01 xxxx xx55 53xx
to 727-04-01 xxxx xxXX XXxx
This setting changes the country from US to your country code.