Upgraded my Focus ST sync 2 system to sync 3, having trouble figuring out how to program everything

Ford SYNC 3 Support CyanLabs Update Support
, , , , , ,
1

I got a sync 3 APIM and all hardware out of another focus and am having issues such as my time does not display, volume controls and voice control on steering wheel don’t work etc etc. I’m a euro guy so I’m used to VCDS, not ForScan so any advice would be much appreciated! My sync 3 software is also only on version 1.0.15139, so many updating to the latest version will help? Not sure though, thanks in advance for any help!

SYNC Region: NA

Navigation Variant: Nav

Manufacturer Year: Pre MY20

Install Type: Retrofit

Old SYNC Version: 1.0.15139

New SYNC Version: 1.0.15139

Do you have a error message, if so what is it?
No error messages seen so far.

Update Method: CyanLabs Syn3 Updater

Syn3 Updater Version: 2.14.2.0

Syn3 Updater Documentation Read: yes

Syn3 Updater Log File

1f182471-bb92-69b8-bf5f-0242ac13000
2

if you tell us your car make and model that would help alot

3

it says in topic, but its a 2013 ford focus st3

4

First problem is your AB config in the APIM isn’t right, it doesn’t matter that the donor was a Focus.

Start by getting your build to current 3.0, you need to do an incremental to 2.2.17011 first, then go to 3.0.23219. After that solve the AB issues.

Post you’re current Sync3 APIM AB

5

I would post my AB, but to be completely honest, I’m not exactly sure how lol

I’m doing the sync 2.2 update as we speak and I’ll see if I can figure it out from there.