Sync 3.4.20282 - Feedback & Issues

[F150Chief]

Reload your Nav Voice files. There is a procedure in the tutorial section.

[x-x]

Sorry for the stupid question. As I was not able to locate the procedure, could you provide me the link???

Thanks in advance
Cris

[F150Chief]

I misunderstood the issue. Back in the original thread posted above was the answer about the NAV Voice issue. The procedure was to downgrade to 3.4.19052 and then upgrade to the desired version.

Try to downgrade to the version you were on previously (3.4.19274) and see if the NAV Voice works. If this works then try to upgrade again.

[AndyG1714 (Andy G)]

I was chatting with a Ford representative about album art on siriusxm, and they said they have removed the art for all vehicles, since it takes a lot of processor speed to organize all of the art for each channel on this version.

[wlaibin]

Hello, I live in China too, I wondering if you select the option “keeping existing maps” or “1.19” in the tool, because the tools says that if your car is macufacted in 2020 , the reformed mode will brick the sync module ,and should only use the option “keeping the existing map”. Thanks for advise.

[avdonr]

If you have a 2020 vehicle then you must select “keep existing maps”. Do NOT select maps to install, this will brick your unit like the warning states.

[wlaibin]

Hello, I live in China too and the same car as you, I wondering if you select the option “keeping existing maps” or “1.19” in the tool, because the tools says that if your car is macufacted in 2020 , the reformatting mode will brick the sync module ,and should only use the option “keeping the existing map”. So which choice do you choose . Thanks for advise.

[wlaibin]

Thanks for advise! I will try it later use the option “keeping existing maps”.

[hallstevenson]

Disappointing but at least they acknowledged it !

[katant26]

if you have activated the steering wheel controls and heated seats with forscan, it will always go to the home screen for safety reasons so as not to distract from driving. This happened to me when I activated those two commands on the sync screen. 3.4. I hope I was helpful. sorry for my english i write from italy.

[F150Chief]

FYI - This has been the behavior in all Sync 3.0 thru 3.4 versions.

[V8vega]

Just updated tonight from 3.0 to 3.4 20282 in my 2018 Edge Sport. All went well and everything seems to work. I do have a couple of things regarding feedback/question. I have NAV and it shows the latest maps installed. When I look at the APIM settings I see the Country code is WS and Language is English (UK). Being in North America, specifically Canada, are there any changes I need to make?

[rapier]

hi

i am currently running build 20196 in which you can browse usb stick can someone confirm this feature has gone or can you still browse when stationary

thanks

[CyanLabs (Scott)]

yes you can browse while stationary still, this is the most stable build in a longtime

[CyanLabs (Scott)]

you can change it to US for US or CA for Canada i believe, but i’m not sure what WS is

[F150Chief]

Sync 3.4.20237 - Feedback & Issues - Ford / Sync 3 - CyanLabs Official Community